| 1.375 Inch x 3 Inch x 0.688 Inch RHP ljt1.3/8-rhp Single Row Angular Contact | Attainable speed for oil-air lubrication:20000 r/min; C1:9.3 mm; D2:120.7 mm; Calculation factor f2C:1.07; Calculation factor f2B:1.02; D:130 mm; B:18 mm; Calculation factor f2A:1; d1:107.94 mm; Preload class A GA:60 N; Size (mm):1.375 Inch x 3 Inch x 0.688 Inch ; |
| 1 Inch x 2.25 Inch x 0.625 Inch RHP ljt1-rhp Single Row Angular Contact | d:70.000 mm; Fillet Radius ra:2.50 mm; Grease Speed Rating Open/Shielded n1:3800 rpm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:143000 N; Basic Static Radial Load Rating Co:104000 N; D:180.0000 mm; B:42.00 mm; Sealed Speed Rating n3:2600 rpm; Oil Speed Rating Open/Shielded n2:4500 rpm; Size (mm):1 Inch x 2.25 Inch x 0.625 Inch ; |
| 1.375 Inch x 3.5 Inch x 0.875 Inch RHP mjt1.3/8-rhp Single Row Angular Contact | F:385 mm; Axial load factor Y:0.6; Limiting value e:0.2; s max.:6.5 mm; Calculation factor kr:0.15; B:82 mm; Reference speed:1300 r/min; d:340 mm; db min.:408 mm; da max.:380 mm; Size (mm):1.375 Inch x 3.5 Inch x 0.875 Inch ; |
| 35mm x 72mm x 17mm NSK 7207beat85-nsk Single Row Angular Contact | d:55 mm; d3 max.:75.54 mm; B1:63.652 mm; Threads per inch:18; Lock nut:N 11; B4:14.3 mm; Mass adapter sleeve assembly:0.43 kg; Lock washer:W 11; d1:49.212 mm; Hydraulic nut:HMVC 11E; Size (mm):35mm x 72mm x 17mm ; |
| 3.75 Inch x 6.75 Inch x 1.125 Inch R%26M ljt3.3/4-r&m Single Row Angular Contact | Basic Dynamic Radial Load Rating C:9360 N; B:12.00 mm; Grease Speed Rating Open/Shielded n1:17000 rpm; Basic Static Radial Load Rating Co:5000 N; d:20.000 mm; Fillet Radius ra:0.64 mm; Oil Speed Rating Open/Shielded n2:20000 rpm; Accessories:Shield & Seal; Sealed Speed Rating n3:11000 rpm; D:42.0000 mm; Size (mm):3.75 Inch x 6.75 Inch x 1.125 Inch ; |
| 45mm x 85mm x 19mm SKF 7209becbm-skf Single Row Angular Contact | Inner ring IR series:IR 30x35x20.5; Limiting speed:7500 r/min; Fw:35 mm; Fatigue load limit Pu:10.2 kN; r min.:0.8 mm; Mass bearing:0.054 kg; Inner ring LR series:LR 30x35x20.5; Reference speed:6000 r/min; Radial shaft seal with a low cross-sectional height, double lip:SD 35x42x4; Radial shaft seal with a low cross-sectional height, single lip:G 35x42x4; Size (mm):45mm x 85mm x 19mm ; |
| 45mm x 85mm x 19mm NSK 7209bwg-nsk Single Row Angular Contact | End plug (suffix Y):EPR 16; R2:33.337 mm; h:52.388 mm; P120°:85.9 kN; J min.:441.325 mm; Labyrinth ring:2 x LOR 129; Pa:38.5 kN; H1:169.875 mm; PG:1/4 NPT; Bearing:22232 CCK/W33; Size (mm):45mm x 85mm x 19mm ; |
| 4 Inch x 8.5 Inch x 1.75 Inch RHP mjt4-rhp Single Row Angular Contact | Bolt Pattern C:0.55 in; Bolt Pattern E:11 1/2 in; Frame Accepts These Shaft Sizes (Bearing Bore):40 mm; Frame Size B:13 in; Frame Size A:5 1/4 in; Bolt Pattern D:2 3/4 in; Length H:0.625 in; Travel:6; Height G:3.938 in; Shaft C/L Distance F:1 31/32 in; Size (mm):4 Inch x 8.5 Inch x 1.75 Inch ; |
| 1.75 Inch x 3.75 Inch x 0.813 Inch RHP ljt1.3/4-rhp Single Row Angular Contact | Basic Dynamic Radial Load Rating C:143000 N; Oil Speed Rating n2:4000 rpm; D:190.0000 mm; Grease Speed Rating n1:3400 rpm; Basic Static Radial Load Rating Co:108000 N; Grease Speed Rating Open/Shielded n1:3400 rpm; Accessories:Without Accessories; d:90.000 mm; Fillet Radius ra:2.50 mm; Oil Speed Rating Open/Shielded n2:4000 rpm; Size (mm):1.75 Inch x 3.75 Inch x 0.813 Inch ; |
| 45mm x 85mm x 19mm FAG 7209-b-mp-uo-fag Single Row Angular Contact | da max.:153 mm; Reference speed:3400 r/min; Fw:143.5 mm; D1 ≈:187.75 mm; Axial load factor Y:0.4; D:215 mm; Limiting value e:0.3; Calculation factor kr:0.2; Basic dynamic load rating C:520 kN; Fatigue load limit Pu:72 kN; Size (mm):45mm x 85mm x 19mm ; |
| 70mm x 110mm x 20mm NSK 7014am-nsk Single Row Angular Contact | Initial grease fill:2154.6 g; Adapter sleeve assembly:SNP 3048x9; L:749.3 mm; P90°:334 kN; ba:89.694 mm; RG:1 NPT; P120°:207 kN; Da:359.999 mm; Labyrinth ring:2 x LOR 513; P150°:185 kN; Size (mm):70mm x 110mm x 20mm ; |
| 3.5 Inch x 8.125 Inch x 1.75 Inch RHP mjt3.1/2-rhp Single Row Angular Contact | h:42.862 mm; Cap bolt recommended tightening torque:515.2 N·m; A1:98.425 mm; R1:63.5 mm; J min.:269.875 mm; da:68.263 mm; H2:44.45 mm; Housing:SAF 616; P180°:34.7 kN; S:4.763 mm; Size (mm):3.5 Inch x 8.125 Inch x 1.75 Inch ; |