| 15mm x 35mm x 11mm Timken 6202 c3-timken Deep Groove | Radial Ball Bearings | Housing Material:[Aluminum Alloy] 201; Width T(mm):55 ～ 80; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Flange O.D. H(φ):77; Bearing I.D. d(mm):20; Type:Bearings with Housin; RoHS:6; Flange Shape:Compact Type; Size (mm):15mm x 35mm x 11mm ; |
| 3 inch x 4.5 inch x 0.75 inch R%26M xlj3-r&m Deep Groove | Radial Ball Bearings | Number of Bearings:Single; Lateral Width L(mm):96; Height H(mm):60; Bearing Used:Deep Groove Ball Bea; C Chamfered:Not Provided; Housing Material:1045 Carbon Steel; Height Indication:Height Selection; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Volume Discount:Available; Size (mm):3 inch x 4.5 inch x 0.75 inch ; |
| 70mm x 125mm x 24mm NSK bl214zz-nsk Deep Groove | Radial Ball Bearings | rs min:1 mm; bearing material:High Carbon Chrome S; Characteristic inner ring frequency, BPFI:4.85 Hz; Harmonized Tariff Code:8482.10.50.68; internal clearance:C3; UNSPSC:31171504; Outside Diameter:2.559 Inch | 65 Mill; Characteristic rolling element frequency, BSF:4.49 Hz; Cage Material:Steel; maximum rpm (oil):12000 rpm; Size (mm):70mm x 125mm x 24mm ; |
| 12mm x 32mm x 10mm NSK 6201vv-nsk Deep Groove | Radial Ball Bearings | Dimension B:6.47 in; Shaft Size :2-15/16 in; Dimension SV:3.29 in; Housing Style:Four-Bolt Pillow Blo; Oil Lubrication - B/C/O Seal:1200 rpm; Full Timken Part Number:QVPR16V215SB; Dimension D Max:9.60 in; Float:0.083 in; Pre Install Clearance Min:0.0037 in; Grease Lubrication - M/N Seal:1500 rpm; Size (mm):12mm x 32mm x 10mm ; |
| 75mm x 130mm x 31mm NSK 4215j-nsk Deep Groove | Radial Ball Bearings | Bearing - Housing - Seal:LSM150BRH; Series Type:Light Series; Cor - Static Load Rating:149273 lbf; Dimension U:0.3 in; Dimension H:2.2 in; Dimension D:16.8 in; Support Type:Take-Up; Ca - Axial Load Rating:6609.30 lbf; Dimension Y:0.9 in; Dimension S:3.4 in; Size (mm):75mm x 130mm x 31mm ; |
| 12mm x 32mm x 10mm FAG 6201-c-hrs-c3-fag Deep Groove | Radial Ball Bearings | Da max:139 mm; Characteristic inner ring frequency, BPFI:10.37 Hz; Radial clearance class:C3; Static load, C0:330 kN; Mass:2.55 kg; Nlim:5,400 rpm; Y1:3.07; Min operating temperature, Tmin:-40 °C; Characteristic outer ring frequency, BPF0:7.63 Hz; da min:96 mm; Size (mm):12mm x 32mm x 10mm ; |
| 15mm x 32mm x 9mm SKF 6002-skf Deep Groove | Radial Ball Bearings | H2:41 mm; G:R1/8"; SW:3.97 mm; H:98 mm; A5:15.9 mm; d1:51.1 mm; T max.:100 °C; L1:225 mm; T min.:-20 °C; Weight:1.98 kg; Size (mm):15mm x 32mm x 9mm ; |
| 70mm x 125mm x 24mm NSK bl214z-nsk Deep Groove | Radial Ball Bearings | Ca90 - Dynamic Thrust Rating (90 million revolutions)7:19600 N; Ab - Cage-Cone Frontface Clearance:2.5 mm; Cg - Geometry Factor:0.0928; d:65.000 mm; WPD:94.5 mm; a - Effective Center Location4:-6.1 mm; Design Units:METRIC; Cage Type:Stamped Steel; db - Cone Backface Backing Diameter:74 mm; da - Cone Frontface Backing Diameter:70 mm; Size (mm):70mm x 125mm x 24mm ; |
| 15mm x 32mm x 9mm FAG 6002-2z-fag Deep Groove | Radial Ball Bearings | Characteristic cage frequency, FTF:0.4 Hz; Characteristic outer ring frequency, BPF0:3.58 Hz; Static load, C0:11.3 kN; Max operating temperature, Tmax:120 °C; Fatigue limit load, Cu:0.66 kN; da min:35 mm; da max:38.8 mm; d:30 mm; Characteristic rolling element frequency, BSF:4.68 Hz; Da max:57 mm; Size (mm):15mm x 32mm x 9mm ; |
| 12mm x 32mm x 10mm Timken 62012rs-timken Deep Groove | Radial Ball Bearings | Bearing Used:Deep Groove Ball Bea; Seals:ZZ (Double Shield); Shape:Flange Type; Days to Ship:7 Days; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Bearing Part Number:624; Size (mm):12mm x 32mm x 10mm ; |
| SKF rls40-skf Deep Groove | Radial Ball Bearings | Mass:0.48 kg; D:73.02 mm; a:18.32 mm; r1a max:3.3 mm; Max operating temperature, Tmax:120 °C; Y0:0.73; C:17.46 mm; Static load, C0:68 kN; T:22.22 mm; B:22.22 mm; |
| 12mm x 28mm x 8mm FAG 6001-2rsr-c3-fag Deep Groove | Radial Ball Bearings | Characteristic rolling element frequency, BSF:5.4 Hz; d:70 mm; da min:78 mm; Nlim (grease):5,100 rpm; B:24 mm; Dynamic load, C:62 kN; Mass:1.07 kg; Characteristic inner ring frequency, BPFI:5.9 Hz; Fatigue limit load, Cu:2 kN; Da max:117 mm; Size (mm):12mm x 28mm x 8mm ; |