| L540049/L54001 NSK CYLINDRICAL ROLLER BEARING | da:120 mm; Labyrinth ring (db shaft position):LOR 127; Labyrinth ring (dc shaft position):LOR 119; Da:215.001 mm; PosiTrac Plus contact element (dc shaft position):B10724-117; Ca:85.801 mm; db:134.938 mm; PG:1/4 NPT; J1:69.85 mm; P90°:111 kN; L:419.1 mm; P180°:81.4 kN; R2:30.163 mm; ba:61.913 mm; Stabilizing ring:SR-24-20; Appropriate attachment bolt size G:0.75 in; h:46.831 mm; J min.:336.55 mm; |
| EE134102/134145 NSK CYLINDRICAL ROLLER BEARING | N1:25.4 mm; Adapter sleeve assembly:SNW 3024x4; J max.:333.375 mm; H2:44.45 mm; A2:155.575 mm; Pa:16.7 kN; P180°:55.6 kN; R1:58.737 mm; PG:1/4 NPT; P60°:136 kN; Initial grease fill:181.44 g; Labyrinth ring:2 x LOR 657; Cap bolt recommended tightening torque:203.4 N·m; H:217.488 mm; R2:30.163 mm; Bearing limiting speed:4000 r/min; P90°:81.4 kN; Housing:SAF 024 KA; Cap bolt, SAE grade:5; |
| H247549/H24751 NSK CYLINDRICAL ROLLER BEARING | Housing:FSAF 024 KA; ba:46.831 mm; Pa:16.7 kN; Cap bolt recommended tightening torque:203.4 N·m; J min.:295.275 mm; P60°:119 kN; Max. speed for PosiTrac Plus seal:1350 r/min; Cap bolt, SAE grade:5; Labyrinth ring:2 x LOR 112; A2:155.575 mm; R1:58.737 mm; da:104.775 mm; End plug (suffix Y):EPR 14; Da:180 mm; L:387.35 mm; Ca:55.804 mm; H1:114.3 mm; A1:111.125 mm; R2:30.163 mm; P90°:71.2 kN; |
| 93825A/93125 NSK CYLINDRICAL ROLLER BEARING | dc min:104; mass:2.14; Oil rpm:5000; Prod_Type3:CRB_SR_NJ; GRS rpm:4300; LangID:1; C:167; Z_:17; db min:94; DE_:136.5; D_:150; C_conv:167000; d:85; Macha rpm:7500; SBRG:2; r1:2; ra:2; KBRG:4155; DA_:18; da:94; |
| EE134102/134143 NSK CYLINDRICAL ROLLER BEARING | b1:5 mm; dk:54.737 mm; Mass plain bearing:0.54 kg; M:4 mm; rb max.:1 mm; Sealing solution:Triple-lip seals; Basic static load rating C0:375 kN; Material constant KM:330; C:28.575 mm; d:31.75 mm; Da max.:58 mm; r1 min.:1 mm; da max.:41.8 mm; da min.:36.2 mm; Specific static load factor K0:300 N/mm²; Basic dynamic load rating C:186 kN; D:61.913 mm; B:35.306 mm; Da min.:52.3 mm; α:8 °; |
| 86650/861 NSK CYLINDRICAL ROLLER BEARING | Calculation factor e:0.3; T:39.688 mm; D:182.562 mm; Mass bearing:3.3 kg; Calculation factor Y:2; Dimension series:48200; Cb min.:6 mm; da max.:140 mm; a:34.02 mm; db min.:142 mm; C:33.338 mm; r1,2 min.:3.5 mm; Basic dynamic load rating C:281 kN; Ca min.:6 mm; Da max.:169 mm; Limiting speed:3200 r/min; d1 ≈:154.5 mm; rb max.:3.3 mm; Reference speed:2600 r/min; Fatigue load limit Pu:44 kN; |
| 29875/2982 NSK CYLINDRICAL ROLLER BEARING | r0 max.:0.6 mm; Limiting speed:7500 r/min; b:3.1 mm; Calculation factor kr:0.025; Calculation factor f0:14.7; Ca max.:6.88 mm; D3:115.21 mm; Reference speed:12000 r/min; Fatigue load limit Pu:1.73 kN; Basic static load rating C0:40.5 kN; ra max.:1.5 mm; Mass bearing:1 kg; da min.:74 mm; D2 ≈:105.8 mm; d:65 mm; Da max.:111 mm; C:4.06 mm; Basic dynamic load rating C:58.5 kN; D:120 mm; r1,2 min.:1.5 mm; |
| 8578/852 NSK CYLINDRICAL ROLLER BEARING | B1:20 mm; c:0.5 mm; Fatigue load limit Pu:0.88 kN; SW:4 mm; Basic dynamic load rating C:5.28 kN; G1:10 mm; B3:9 mm; Recommended tighthening torque:8 N·m; Basic static load rating C0:8 kN; Maximum dynamic radial loads Fr max.:5.1 kN; Plug:VD1; d1:15 mm; Hexagonal nut:M 8x1.25; d:11 mm; r1,2 min.:0.15 mm; Maximum static radial loads F0r max.:7.35 kN; Grease fitting:NIP A1; Limiting speed:4000 r/min; |
| EE420651/421417 NSK CYLINDRICAL ROLLER BEARING | B:35 mm; Basic dynamic load rating C:156 kN; l7 min.:58 mm; dk:66 mm; C1 max.:31 mm; d2 max.:114 mm; l2 max.:244 mm; d:50 mm; h:185 mm; l1 min.:104 mm; Material constant KM:330; Specific dynamic load factor K:100 N/mm²; r1 min.:0.6 mm; Mass rod end:3.3 kg; Basic static load rating C0:245 kN; α:6 °; G:M 45x3; |
| EE380080/38019 NSK CYLINDRICAL ROLLER BEARING | SRIX:0.08; cyl count:19; cyl dia:19.05; X1:1; C:84; r:2.1; Y0:2.5; GRS rpm:3400; hidTable:ecat_NSSAB; KBRG:1354; Prod_Type3:SABB_SA_TB; yobi:2219K; d:95; D_a:159; da:106; hidYobi:2219K; groove inner:113.434; Y2:3.7; ra:2; groove outer:153.618; |
| EE420701/421437 NSK CYLINDRICAL ROLLER BEARING | d:230 mm; Coefficient of friction µ max.:0.15; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; D:250 mm; Coefficient of friction µ min.:0.08; Mass bushing:16.6 kg; B:250 mm; Specific static load factor K0:45 N/mm²; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:e7; α:124 °; a:12.5 mm; h:232.5 mm; Permissible sliding velocity v max.:0.5 m/s; |
| H239640/H23961 NSK CYLINDRICAL ROLLER BEARING | Z_:11; B_:49; SDM_:164.99; hidYobi:7321ADT; DI_:126.67; 2B_:98; SRI:19.81; SBRG:3; ALPHA_:30; da:119; r:3; Oil rpm:2800; C0:385; C_conv:335000; d:105; hidTable:ecat_NSANGB; D_a:211; D_:225; SREX:0.125; DA_:38.1; |
| L853049/L85301 NSK CYLINDRICAL ROLLER BEARING | Recommended diameter for attachment bolts, mm G:12 mm; Basic dynamic load rating C:19.5 kN; A1:25 mm; L:159 mm; Recommended tightening torque for grub screw:6.5 N·m; Basic static load rating C0:11.2 kN; Hexagonal key size for grub screw N:4 mm; H2:19 mm; Fatigue load limit Pu:0.475 kN; Housing material:Composite; N:21.5 mm; B1:48.4 mm; d:30 mm; Recommended diameter for attachment bolts, inch G:0.5 in; |
| 80170/80222 NSK CYLINDRICAL ROLLER BEARING | Grease:4 200 min-1; Static (Coa):28.2 kN; Pu:1.282 kN; D:49.2 mm; B:12 mm; Oil:0 min-1; d:30 mm; Dynamic (Ca):17.4 kN; |
| EE526130/52619 NSK CYLINDRICAL ROLLER BEARING | Fatigue load limit Pu:1660 kN; Mass bearing:565 kg; Basic dynamic load rating C:8580 kN; Calculation factor Y2:3; B:495.3 mm; d1 ≈:520 mm; d:479.425 mm; Thrust factor K:1.76; Basic static load rating C0:22400 kN; D1 ≈:610 mm; Design variant/feature:TQOS/GWISI; r1,2 min.:3.3 mm; Calculation factor Y1:2; D:679.45 mm; T:495.3 mm; Calculation factor e:0.33; Comparative radial load rating CF:2280 kN; |
| EE275108/275155 NSK CYLINDRICAL ROLLER BEARING | Ba min.:7 mm; D1 ≈:73.1 mm; Fatigue load limit Pu:10.8 kN; B2:13 mm; db min.:50 mm; Limiting speed:11000 r/min; Reference speed:7500 r/min; s1 max.:7.1 mm; Operating clearance factor k2:0.128; B1:39 mm; Da min.:70.4 mm; d3:65 mm; ra max.:1 mm; Mass bearing + sleeve:0.76 kg; Ca min.:0.3 mm; d1:40 mm; Da max.:78 mm; r1,2 min.:1.1 mm; d2 ≈:55.6 mm; Misalignment factor k1:0.095; |