| EE170950/1714 NSK CYLINDRICAL ROLLER BEARING | a:33.094 mm; Fillet radius ra max.:1 mm; C:32.5 mm; Calculation factor Y1:1.8; Basic dynamic load rating C:111 kN; Abutment housing - axial space at the small side face/ both sides of the outer ring Cb min.:4.5 mm; Reference speed:6300 r/min; Basic static load rating C0:143 kN; Abutment diameter shaft Db min.:65 mm; Fillet radius rc max.:0.3 mm; l:3.5 mm; r5 min.:0.3 mm; D:68 mm; Calculation factor Y0:1.8; |
| EE551050/551662 NSK CYLINDRICAL ROLLER BEARING | Static (Cor):5.5 mm; Dynamic (Cr):3 mm; Grease:224 kN; Oil:27.320 kN; with tapered bore:4 800 min-1; with cylindrical bore:3 800 min-1; d:65 mm; Pu:182 kN; rs (min):1.5 mm; D:120 mm; B:31 mm; |
| LL639249/LL63921 NSK CYLINDRICAL ROLLER BEARING | A2:123.825 mm; Bearing limiting speed:5600 r/min; Appropriate attachment bolt size G:0.5 in; A1:79.375 mm; ba:36.513 mm; S:4.763 mm; H2:30.163 mm; L:279.4 mm; J max.:241.3 mm; Initial grease fill:68.04 g; R1:44.45 mm; Cap bolt:2 x 1/2-13 UNC; Housing:FSAF 611; P180°:14.2 kN; Cap bolt, SAE grade:8; J min.:206.375 mm; Pa:6.94 kN; R2:25.4 mm; PG:1/8 NPT; N1:15.875 mm; |
| EE911618/9124 NSK CYLINDRICAL ROLLER BEARING | H1:79.375 mm; H:160.338 mm; S:0.794 mm; Limiting speed:3400 r/min; Attachment bolt diameter G:19.05 mm; da:68.263 mm; A1:99.219 mm; d2:111.125 mm; B:92.075 mm; H2:47.625 mm; Mass bearing unit:11.6 kg; s:31.75 mm; J max.:247.65 mm; Basic dynamic load rating C:158 kN; A:76.2 mm; J min.:234.95 mm; L:304.8 mm; |
| 93708/93125 NSK CYLINDRICAL ROLLER BEARING | D1 ≈:488 mm; ra max.:2 mm; Limiting value e:0.2; Fatigue load limit Pu:102 kN; F:447 mm; Reference speed:1200 r/min; Mass bearing:22 kg; s max.:3.3 mm; D:520 mm; Axial load factor Y:0.6; Calculation factor kr:0.1; da max.:442 mm; B:46 mm; Limiting speed:1800 r/min; r1,2 min.:2.1 mm; d:420 mm; da min.:431 mm; Basic static load rating C0:1200 kN; db min.:452 mm; Basic dynamic load rating C:572 kN; |
| EE117063/117148 NSK CYLINDRICAL ROLLER BEARING | d:55 mm; B:25 mm; Reference speed:7500 r/min; Basic dynamic load rating C:114 kN; Mass bearing:0.92 kg; da min.:63 mm; D:100 mm; Limiting speed:13000 r/min; r3,4 min.:1.1 mm; ra max.:1.5 mm; Calculation factor kr:0.3; F:66 mm; D1 ≈:86.25 mm; Limiting value e:0.3; r1,2 min.:1.5 mm; Basic static load rating C0:118 kN; Da max.:91.4 mm; Axial load factor Y:0.4; d1 ≈:70.8 mm; db min.:73 mm; |
| H239640/H23961 NSK CYLINDRICAL ROLLER BEARING | Z_:11; B_:49; SDM_:164.99; hidYobi:7321ADT; DI_:126.67; 2B_:98; SRI:19.81; SBRG:3; ALPHA_:30; da:119; r:3; Oil rpm:2800; C0:385; C_conv:335000; d:105; hidTable:ecat_NSANGB; D_a:211; D_:225; SREX:0.125; DA_:38.1; |
| 93708/93126 NSK CYLINDRICAL ROLLER BEARING | P180°:14.7 kN; N1:19.05 mm; Bearing limiting speed:7000 r/min; h:32.544 mm; Initial grease fill:39.69 g; A1:69.85 mm; Appropriate attachment bolt size G:0.625 in; R1:38.1 mm; S:4.763 mm; R2:17.462 mm; P150°:12 kN; Cap bolt:2 x 1/2-13 UNC; Pa:9.34 kN; P120°:13.3 kN; ba:30.956 mm; da:45 mm; Da:100 mm; RG:1/8 NPT; dc:42.875 mm; Cap bolt recommended tightening torque:149.1 N·m; |
| EE128102/12816 NSK CYLINDRICAL ROLLER BEARING | Mass rod end:2.2 kg; Material constant KM:330; C1 max.:24 mm; d:40 mm; w:50 mm; B:28 mm; dk:53 mm; d4 ≈:58 mm; l3 min.:65 mm; l4 max.:194 mm; G:M 42x3; l5 ≈:25 mm; h1:145 mm; Basic static load rating C0:166 kN; α:7 °; r1 min.:0.6 mm; Specific dynamic load factor K:100 N/mm²; Basic dynamic load rating C:100 kN; d2 max.:94 mm; l7 min.:50 mm; |
| LM742749/LM74271 NSK CYLINDRICAL ROLLER BEARING | Calculation factor kr:0.31; Fatigue load limit Pu:520 kN; Da max.:480 mm; r1,2 min.:5 mm; F:389 mm; Limiting speed:1300 r/min; K:9 mm; Basic static load rating C0:5700 kN; D1 ≈:450 mm; d:350 mm; rb max.:4 mm; Mass bearing:118 kg; Reference speed:900 r/min; db min.:393 mm; r3,4 min.:5 mm; s max.:6 mm; b:16.7 mm; D:500 mm; Basic dynamic load rating C:2460 kN; ra max.:4 mm; |
| M249749/M24971 NSK CYLINDRICAL ROLLER BEARING | Limiting speed:1100 r/min; Fatigue load limit Pu:425 kN; Reference speed:530 r/min; B:28.5 mm; Minimum axial load factor A:1.843; r1,2 min.:4 mm; H:85 mm; Da max.:157 mm; da min.:275 mm; ra max.:4 mm; d:140 mm; Mass bearing:29.7 kg; Basic dynamic load rating C:1100 kN; Basic static load rating C0:4800 kN; d1:280 mm; D:280 mm; D1:144 mm; |
| EE971298/9721 NSK CYLINDRICAL ROLLER BEARING | hidTable:ecat_NSANGB; ao:26.2; Z_:12; DI_:78.55; SBRG:3; hidYobi:7313AWDF; SRE:12.38; rb:1; yobi:7313AWDF; mass:4.24; C_conv:180000; SRIX:0.08; d:65; r1:1.1; LangID:1; C:180; Oil rpm:3800; ra:2; db:72; B_:33; |
| LL735449/LL73541 NSK CYLINDRICAL ROLLER BEARING | Calculation factor Y2:3; Calculation factor e:0.33; r1,2 min.:3 mm; Basic dynamic load rating C:13200 kN; Comparative radial load rating CF:2850 kN; D1 ≈:756 mm; Mass bearing:768 kg; Thrust factor K:1.74; Calculation factor Y1:2; r3,4 min.:6 mm; Basic static load rating C0:31000 kN; Fatigue load limit Pu:2120 kN; Calculation factor Y0:2; d:625 mm; B:600 mm; D:815 mm; Comparative axial load rating CFa:468 kN; |
| LM565946/LM56591 NSK CYLINDRICAL ROLLER BEARING | rs (min):1.1 mm; s:1.5 mm; Dynamic (Ca):42.2 kN; B:18 mm; r1s (min):1.1 mm; d2 (max):54.6 mm; D:80 mm; Static (Coa):37.6 kN; b1:9 mm; b:5 mm; d2:40 mm; Pu:4.590 kN; F:50 mm; E:70 mm; |
| M231649/M23161 NSK CYLINDRICAL ROLLER BEARING | J1:82.55 mm; P120°:73.8 kN; Cap bolt:2 x 1-8 UNC; Max. speed for Taconite seal:675 r/min; Housing:SAW 526; R1:79.375 mm; PG:1/4 NPT; P60°:189 kN; Mass pillow block:68 kg; S:4.763 mm; L:466.725 mm; Stabilizing ring:SR-26-0; R2:36.513 mm; Initial grease fill:382.73 g; Cap bolt, SAE grade:5; A2:269.875 mm; H:295.275 mm; Cap bolt recommended tightening torque:400 N·m; RG:1/2 NPT; End plug (suffix Y):EPR 15; |
| M238849/M23881 NSK CYLINDRICAL ROLLER BEARING | A2:273.05 mm; Cap bolt recommended tightening torque:271.2 N·m; P90°:173 kN; A1:190.5 mm; RG:1 NPT; H1:200.025 mm; Cap bolt:4 x 7/8-9 UNC; Ca:123.8 mm; S:4.763 mm; P150°:94.3 kN; P60°:290 kN; End plug (suffix Y):EPR 16; R2:42.069 mm; R1:120.65 mm; Housing:SAF 632; Mass pillow block:178 kg; h:68.263 mm; Labyrinth ring:2 x LOR 130; Bearing limiting speed:1900 r/min; Appropriate attachment bolt size G:1.25 in; |