| 7014ACD/P4ADBC SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | PG:1/8 NPT; A1:79.375 mm; J min.:206.375 mm; P120°:13.3 kN; RG:1/8 NPT; Ventilation fitting:38174-12; H:157.162 mm; L:279.4 mm; ba:29.369 mm; Max. speed for contact seal:2950 r/min; N1:15.875 mm; Housing:FSAF 611; Appropriate attachment bolt size G:0.5 in; Initial grease fill:136.08 g; Cap bolt, SAE grade:8; R1:44.45 mm; da:49.212 mm; Cap bolt recommended tightening torque:149.1 N·m; A2:123.825 mm; |
| 7012ACD/P4ATBTB SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | SRIX:0.02; SREX:0.02; db:7.2; KBRG:619; Z_:8; yobi:MR126DD; mass:1.74; fo:14.474; D_b:10.9; C:0.715; r1:0.15; D_:12; B_:4; Prod_Type3:ESM_MD_DD; d:6; B1:4; C0:0.292; rb:0.15; hidYobi:MR126DD; DE_:10.588; |
| 7010CD/P4ADBC SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Basic dynamic load rating C:404 kN; Calculation factor e:0.4; r1,2 min.:3.5 mm; Fatigue load limit Pu:56 kN; rb max.:3.3 mm; Cb min.:11 mm; D:161.925 mm; Da min.:134 mm; a:39.841 mm; Ca min.:8 mm; Basic static load rating C0:510 kN; db min.:103 mm; Da max.:149 mm; r3,4 min.:3.3 mm; Mass bearing:4.8 kg; Limiting speed:4000 r/min; B:55.1 mm; Dimension series:6500; da max.:102 mm; ra max.:3.5 mm; |
| 7017ACE/HCP4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | C:64.5; Oil rpm:7500; SRIX:0.05; DE_:77.772; KBRG:7321; Prod_Type3:ACBB_SR_MM_DT; hidTable:ecat_NSANGB; D_a:78; d:45; r:1.1; GRS rpm:5600; mass:0.822; DI_:52.224; 2B_:38; r1:0.6; SDM_:64.998; ra:1; yobi:7209AWDT; C_conv:64500; SRE:6.6; |
| 7014CDGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | N1:6.4 mm; B:32 mm; d4:93 mm; J1:108 mm; Associated spanner (Hook spanner in accordance with DIN 1810):B 120-130; Recommended tightening torque:35 N·m; J2:17 mm; Grub (set) / Locking screw size:M 10; d1:110 mm; N2:8 mm; Axial static load carrying capacity:680 kN; G:M 90x2; d3:120 mm; Mass:1.2 kg; |
| 7020ACD/HCP4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | Z_:20; SBRG:10; DI_:56.211; a:26.8; B_:16; r1:0.6; DE_:73.777; SRIX:0.04; hidYobi:7010AW; SDM_:64.994; m0:0.349; D_a:74; yobi:7010AW; C0:21.1; SREX:0.04; d:50; C_conv:24500; SRE:4.54; KBRG:7021; C:24.5; |
| 7018ACE/HCP4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | d2:45 mm; Dynamic (Ca):61.9 kN; Static (Coa):70.8 kN; C:16 mm; rs (min):1.5 mm; r1s (min):1.5 mm; T:20.75 mm; Pu:8.630 kN; r2s (min):0.6 mm; B:19 mm; a:18 mm; D:85 mm; |
| 7015CDGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | C:9.4; Oil rpm:20000; da max:25.5; DE_:37.35; fo:13.8; SDM_:31; KBRG:6101; DA_:6.35; SREX:0.04; B_:12; da min:24; hidYobi:6004; Prod_Type3:DGBB_SR_OT; hidTable:ecat_NSRDGB; r:0.6; LangID:1; yobi:6004; d:20; SRIX:0.02; SRE:3.37; |
| 7010ACD/P4AQBTA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | Oil rpm:2200; DE_:283; B_:65; SDM_:238; ra:3; SBRG:3; LangID:1; Fw:193; Prod_Type3:CRB_SR_NUP; DI_:193; d:150; Macha rpm:3800; D_:320; da:166; r:4; KBRG:4165; Z_:14; C:760; TSR rpm:2200; mass:27.4; |
| 7017CE/HCP4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Prod_Type3:SABB_SA_TB; cyl dia:19.05; hidYobi:1315K; ra:2; KBRG:1352; SRIX:0.08; X2:0.65; LangID:1; Y0:2.9; GRS rpm:3800; CAng:8.495; Y3:2.8; Oil rpm:4500; PCD:118.5; hidTable:ecat_NSSAB; mass:3.55; SRI:10; C:80; e:0.22; Y2:4.4; |
| 7012ACDGB/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | DI_:126.272; B_:38; r1:1.1; C0:315; rb:1; GRS rpm:2200; KBRG:7221; SRI:14.86; hidTable:ecat_NSANGB; 2B_:76; yobi:7222AWDF; DA_:28.575; SREX:0.1; D_:200; Z_:15; ra:2; db:117; LangID:1; SDM_:155.014; ALPHA_:30; |
| 7010CEGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | a:15 mm; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:16.6 kg; Tolerance housing:H7; Tolerance shaft:e7; B:300 mm; D:210 mm; d:190 mm; Specific dynamic load factor K:25 N/mm²; Specific static load factor K0:45 N/mm²; α:124 °; h:192 mm; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ min.:0.08; |
| 709ACD/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | B_:3.175; C_1:0.914; d:6.35; Z_:11; yobi:FR168ZZ; mass:0.68; SREX:0.01; C2:0.914; hidYobi:FR168ZZ; D_:9.525; DA_:1; C:0.375; D1:10.719; DE_:8.8; KBRG:614; B1:3.175; SDM_:7.8; GRS rpm:48000; C0:0.173; SRIX:0.01; |
| 7013CE/P4ADBA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | P90°:84.5 kN; Eye bolt:2 x 3/8-16 UNC; ba:46.831 mm; R1:65.088 mm; Da:180 mm; RG:3/8 NPT; H1:114.3 mm; Housing:SSAFS 024 KA; A2:155.575 mm; A1:111.125 mm; PG:1/4 NPT; P120°:52.5 kN; H2:44.45 mm; Ca:55.804 mm; R2:30.163 mm; Max. speed for PosiTrac Plus seal:1350 r/min; L:387.35 mm; PosiTrac Plus contact element:2 x B10724-113; End plug (suffix Y):EPR 14; Cap bolt, SAE grade:8; |
| 7011ACD/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | A:4.2 mm; d3:260 mm; d1:200 mm; d:220 mm; B:30 mm; G2:M 6; G3:9 mm; Hydraulic nut:HMV 44E; B1:96 mm; B5:41 mm; G:Tr 220x4; Mass adapter sleeve assembly:8.6 kg; |
| 7018ACDGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | P180°:16.9 kN; Mass pillow block:13.1 kg; Bearing limiting speed:6300 r/min; Initial grease fill:136.08 g; P60°:42.3 kN; Da:130 mm; R1:49.212 mm; PG:1/8 NPT; Ca:55.804 mm; Stabilizing ring:2 x SR-1612; Pa:10.7 kN; Appropriate attachment bolt size G:0.5 in; L:285.75 mm; P150°:13.8 kN; H1:82.55 mm; R2:19.05 mm; Cap bolt, SAE grade:8; Labyrinth ring (dc shaft position):LOR 33; Cap bolt:2 x 1/2-13 UNC; |