| 60.30.0550.100.11.1504 Standard 5 Slewing Ring Bearings | b:45 mm; L1:242 mm; Thread D12:Tr560x6; Ro:G1/4; e:10 mm; t:15 mm; Weight:63.5 Kg; Appropriate Hydraulic Nut:HMV112; d1:500.00 mm; Appropriate Withdrawal Nut No.:HM30/560; |
| 162.25.0980.890.11.1503 Standard 5 Slewing Ring Bearings | r - Outer Ring To Clear Radius3:0.3 mm; Da - Outer Ring Backing Diameter:33.700 mm; Contact Angle:15 º; Limiting Speed (Grease):42100 rpm; R - Inner Ring To Clear Radius2:0.3 mm; Ce - Dynamic Radial Rating1:8080 N; Bearing Width:9 mm; Limiting Speed (Oil):84200 rpm; Bearing Weight:0.04 Kg; Cage Type:CR - Phenolic Outer; C0 - Static Radial Rating:4560 N; do - Ball Diameter:4.762500 mm; d:20 mm; Ball Type:STEEL; |
| 162.16.0560.891.21.1503 Standard 5 Slewing Ring Bearings | t:15 mm; Appropriate Hydraulic Nut:HMV72; Ro:G1/4; Thread D12:Tr360x5; L1:273 mm; Weight:31.90 Kg; d1:320.00 mm; e:9.0 mm; Appropriate Withdrawal Nut No.:HM3172; b:38 mm; |
| 161.25.0980.891.21.1503 Standard 5 Slewing Ring Bearings | Series Type:Light Series; Dimension H :4 in; Support Type:Two-Bolt Plummer Blo; Pillow/Plummer Block Style:Split Cylindrical Ho; Bearing Number:LSE304BX; Cor - Static Load Rating:52033 lbf; Dimension J2 :10-3/8 in; Seal Type:Felt Type; Maximum Speed:2790 rpm; Shaft Size:3.25 in; Dimension J1 :11-5/8 in; Cr - Dynamic Load Rating:42145 lbf; Dimension M :3-7/8 in; Dimension L :13-5/8 in; |
| 230.20.0700.503 Type 21/850. Standard 5 Slewing Ring Bearings | Dimension M:2.96 in; C0 - Static Load:113000 lb; Y1 - Geometry Factor:2.85; Dimension C:6.0000 in; Dimension K:1.63 in; Housing Style:Round Flange; Engineering Group:Mounted Bearing; Pre Install Clearance Max:0.120 mm; Dimension N:3.810 in; Full Timken Part Number:QMFY20J311SB; e - Geometry Factor:0.24; Locking Style:Eccentric; Dimension S:4.590 in; Eng Internal Radial Clearance - Min:0.0030; Dimension D:8.38 in; |
| 161.25.1077.891.21.1503 Standard 5 Slewing Ring Bearings | Bearing - Housing - Seal UPC:013992064868; Seal Type:Kevlar Packing Seal; Series Type:Medium Series; Ca - Axial Load Rating:13803 lbf; Dimension P:1.1 in; Shaft Size:6-7/16 in; Maximum Speed:1200 rpm; Bearing Number:MSE607BR; Dimension H:4.9 in; Bearing Type:Split Cylindrical Re; Dimension V:0.2 in; Dimension N:16.875 in; Bearing - Housing - Seal:MSE607BRHKPS; Cor - Static Load Rating:264151 lbf; Note:This product line wa; |
| 162.20.0560.891.21.1503 Standard 5 Slewing Ring Bearings | Da - Cup Frontface Backing Diameter:2.40 in; e - ISO Factor4:0.35; D:2.5000 in; C - Double Cup Width:1.2500 in; G2 - Heat Generation Factor (Rib-Roller End):23.3; Series:13800; Y1 - ISO Factor5:1.95; K - Factor3:1.69; r - Cup Frontface To Clear Radius2:0.02 in; Y2 - ISO Factor6:2.9; Cg - Geometry Factor8:0.0601; G1 - Heat Generation Factor (Roller-Raceway)7:14.8; Design Units:Imperial; Y - ISO Factor1:1.73; |
| 61.20.0944.500.01.1503 Standard 5 Slewing Ring Bearings | Support Type:Four-Bolt Plummer Bl; Bolt Size:4 x 3/4; Shaft Size:3-15/16 in; Dimension K :2-3/4 in; Maximum Speed:2130 rpm; Bearing Number:MSE315BR; Note:This product line wa; Dimension L :16-1/2 in; Dimension J1 :14-1/2 in; Cor - Static Load Rating:110375 lbf; Series Type:Medium Series; Seal Type:Felt Type; Dimension J2 :12-5/8 in; Dimension H :4-15/16 in; Housing Width:5.7 in; |
| 61.25.0980.108.21.1504 Standard 5 Slewing Ring Bearings | B - Outer Ring Width:163.000 mm; Design Unit:METRIC; d:460.000 mm; Cage Type:YMB; R - Inner Ring To Clear Radius1:5.000 mm; e - ISO Factor3:0.22; Cage Material:Brass; Reference Thermal Speed Rating (Grease):550; Cg - Geometry Factor8:0.0991; B - Inner Ring Width:163 mm; C0 - Static Radial Rating:7570000 N; D:680.000 mm; Y1 - ISO Factor5:4.56; Bearing Weight:205.000 Kg; UPC Code:087796029132; Reference Thermal Speed Rating (Oil)7:640; |
| 231.20.0600.503 Type 21/750.1 Standard 5 Slewing Ring Bearings | B:38.2500 in; H:23.4375 in; Diameter S-1:10 7/16 in; E Min.:32.7500 in; A:12.0000 in; Bearing Number:23156K; Triple Seal Reqd:ER 745-1; Full Timken Part Number:SDAF23156K10-7/16; E Max.:33.5000 in; Bolt Hole Length:2 in; Assembly Weight:1300.000 lb; D:3.3750 in; E:33.1250 in; Housing Only2:SDAF3156K x 10-7/16; Adapter Assembly Number1:SNP-3156 x 10-7/16; C:14.7500 in; Bolt Hole Width:1.625 in; F:9 in; |
| 162.20.0630.890.11.1503 Standard 5 Slewing Ring Bearings | K - Factor7:1.24; R - Cone Backface To Clear Radius1:0.14 in; C1 - Cup Flange Width:0.2812 in; D:6.6250 in; r - Cup Backface To Clear Radius2:0.130 in; C90 - Dynamic Radial Rating (90 million revolutions)4:15400 lbf; d:4.0000 in; G2 - Heat Generation Factor (Rib-Roller End):37.2; Aa - Cage-Cone Backface Clearance:0.17 in; T1 - Bearing Width:1.625 in; D1 - Flange Outer Diameter:6.9030 in; e - ISO Factor8:0.47; |
| 232.21.0875.013 Type 21/950.2 Standard 5 Slewing Ring Bearings | Eng Internal Radial Clearance - Min:0.0043; Pre Install Clearance Min:0.0043 in; Oil Lubrication - T Seal:950 rpm; Y1 - Geometry Factor:2.08; Dimension E:3.75 in; Dimension H:3.00 in; UPC Code:0883450155977; Bearing Number:23230; Shaft Size Type:Metric; Grease Lubrication - B/C/O Seal:350 rpm; Oil Lubrication - M/N Seal:650 rpm; Dimension D Min:17.38 in; Dimension A:6.69 in; Oil Lubrication - B/C/O Seal:350 rpm; |
| 62.20.0710.001.21.1503 Standard 5 Slewing Ring Bearings | L:2.559 in; Threads No. per Inch:12; Major Dia - B:4.778 in; d:3.937 in; Taper:1:12; F:0.115 in; A:4.344 in; G:0.433 in; Weight:2.45 lb; |
| 280.30.1100.013 Type 110/1300. Standard 5 Slewing Ring Bearings | G2 - Heat Generation Factor (Rib-Roller End):726.6; da - Cone Frontface Backing Diameter:20.31 in; C0 - Static Radial Rating:822000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:50200 lbf; db - Cone Backface Backing Diameter:20.55 in; Series:243000; C90 - Dynamic Radial Rating (90 million revolutions)5:85500 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:149000 lbf; |
| 232.20.0900.013 Type 21/1050.2 Standard 5 Slewing Ring Bearings | O.D. D:540.000 mm; Width B:180.000 mm; DUR/DOR F/E:405.000 mm; Bore d:360.000 mm; Dimension S4:7.90 mm; Dynamic Load Rating C11:3180 kN; Static Load Rating Co:5580 kN; Chamfer r1smin3:5.0 mm; Chamfer rsmin:5.00 mm; Backing Housing Diameter Ds:507.0 mm; Number of Lubrication Holes:10; Weight:309.000 lb; Geometry Factor Cg2:0.2480; Lubrication Hole Diameter h:9.5 mm; Thermal Speed Ratings - Oil:560 rpm; |
| 230.20.0600.503 Type 21/750. Standard 5 Slewing Ring Bearings | Oil Speed Rating n2:9600 rpm; d:45.000 mm; B:50.00 mm; Basic Dynamic Radial Load Rating C:95600 N; Grease Speed Rating n1:6800 rpm; Fillet Radius ra:1.50 mm; Fillet Radius rb:1.00 mm; D:100.0000 mm; Basic Static Radial Load Rating Co:81500 N; |
| No. | Brand | D | k | b | U | e | t | E | J |
| 232.20.0600.013 Type 21/750.2 | Standard 5 | 35.0000 mm | - | - | - | - | - | - | - |
| 230.20.0600.503 Type 21/750. | Standard 5 | 100.0000 mm | - | - | - | - | - | - | - |
| 60.20.0944.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.30.1120.000.11.1504 | Standard 5 | 440 mm | - | - | - | - | - | - | - |
| 61.25.0980.891.21.1503 | Standard 5 | 235.000 mm | - | - | - | - | - | - | - |
| 62.20.0844.500.01.1503 | Standard 5 | 355.6 mm | - | - | - | - | - | - | - |
| 161.16.0630.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.25.1055.575.11.1403 | Standard 5 | - | - | - | - | 4.2 mm | 9 mm | - | - |
| 281.30.1075.013 Type 110/1200.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.20.0844.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.20.0560.891.21.1503 | Standard 5 | 3.3750 in | - | - | - | - | - | - | - |
| 162.25.1077.891.21.1503 | Standard 5 | 52.0000 mm | - | - | - | - | - | - | - |
| 60.20.0744.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.20.1246.991.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.20.0844.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.20.0900.503 Type 21/1050.1 | Standard 5 | 340.000 mm | - | - | - | - | - | - | - |
| 61.20.0844.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.25.1180.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 280.30.0975.013 Type 110/1100. | Standard 5 | - | - | - | - | - | - | - | - |
| 91.25.1154.991.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.20.1094.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.25.0980.890.11.1503 | Standard 5 | 37 mm | - | - | - | - | - | - | - |
| 231.20.0600.013 Type 21/750.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.20.1360.001.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.25.0886.800.11.1504 | Standard 5 | 323.850 mm | - | - | - | - | - | - | - |
| 61.25.1255.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
192.20.1250.990.41.1502 Standard 5 Slewing Ring Bearings Video
China Triple Row Slewing Ring Bearing for Steel Plant
192.20.1250.990.41.1502, 192.20.1400.990.41.1502, 192.20.1600.990.41.1502. 192.20.1800.990.41.1502, 192.20.2000.990.41.1502, 192.25.1800.990
Slewing Bearing with 1 Year Warranty Period 192.20
191.20.1250.990.41.1502, 192.20.1250.990.41.1502, 191.20.1400.990.41.1502,192.20.1400.990.41.1502, 191.20.1600.990.41.15..About Slewing Bearing with
192.20.1250.990.41.1502 slewing ring bearings with internal
Page 1. Luoyang JCB Bearing Technology Co., Ltd
Slewing Bearing, Slewing Drive from China Manufacturers
480 Products - Slewing Bearing with 1 Year Warranty Period 192.20.1250.990.41.1502. FOB Price: US $1,050-1,120 / Piece. Min. Order: 1 Piece. Rolling Body:
192.20.1250.990.41.1502 slewing bearing ring turntable gear
Nov 22, 2018 - 192.20.1250.990.41.1502 slewing bearing ring turntable gear. Mr. Wen Chen Overseas Marketing Manager WCB BEARING CO.,LTD
192.20.1250.990.41.1502 Drawing of Rothe Erde slewing
192.20.1250.990.41.1502. Size：; Language： English; Categories： Drawing; Download. Copyright @2002-2012 Luoyang JCB Bearing Technology Co., Ltd | All
Buy 192.20.1250.990.41.1502 Rothe erde slewing ring - RT
Buy 192.20.1250.990.41.1502 Rothe erde slewing ring from RT BEARINGS PTV.LTD，thyssenkrupp rothe erde slewing bearing Distributor online Service