| 230.20.0500.503 Type 21/650. Standard 5 Slewing Ring Bearings | C90 - Dynamic Radial Rating (90 million revolutions)5:180000 lbf; K - Factor8:1.76; C1 - Dynamic Radial Rating (1 million revolutions)6:693000 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:1210000 lbf; Aa - Cage-Cone Backface Clearance:0.37 in; a - Effective Center Location4:-0.32 in; Cage Type:Stamped Steel; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:313000 lbf; |
| 12.20.0895.000.11.1504 Standard 5 Slewing Ring Bearings | Float:0.083 in; Dimension F:8.63 in; Eng Internal Radial Clearance - Min:0.0043; C0 - Static Load:99000 lb; Oil Lubrication - B/C/O Seal:1000 rpm; Weight:35 lb; Dimension C:4.9 in; Y1 - Geometry Factor:2.80; Engineering Group:Mounted Bearing; Oil Lubrication - M/N Seal:1300 rpm; Dimension L Exp:3.95 in; Eng Internal Radial Clearance - Max:0.0055; UPC Code:0883450040495; Housing Style:Four-Bolt Square Fla; |
| 62.20.0560.000.11.1503 Standard 5 Slewing Ring Bearings | C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:189000 lbf; db - Cone Backface Backing Diameter:4.65 in; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (1 million revolutions)6:108000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:48900 lbf; Cg - Geometry Factor:0.120; da - Cone Frontface Backing Diameter:4.45 in; G2 - Heat Generation Factor (Rib-Roller End):37.5; |
| 61.20.1094.575.01.1403 Standard 5 Slewing Ring Bearings | Y - ISO Factor3:1.79; C - Cup Width:0.7500 in; D:3.3465 in; r - Cup Backface To Clear Radius1:0.090 in; e - ISO Factor2:0.33; Series:25500; Da - Cup Frontface Backing Diameter:3.11 in; Cg - Geometry Factor:0.0801; Design Units:Imperial; Cup Part Number:25526; Db - Cup Backface Backing Diameter:2.91 in; |
| 282.30.1275.013 Type 110/1400.2 Standard 5 Slewing Ring Bearings | C11:66.00 mm; L:212.00 mm; d1:400.00 mm; Lockwasher and Lockplates:MS 3084; Weight:43.70 Kg; D3:490 mm; Appropriate Hydraulic Nut:HMV84; Thread G:Tr420x5; C:52 mm; Locknut:HM 3084; |
| 62.25.1077.308.11.1504 Standard 5 Slewing Ring Bearings | Grease Lubrication - B/C/O Seal:1150 rpm; C - Dynamic Load (Basic):57200 lb; Dimension L Exp:3.53 in; Engineering Group:Mounted Bearing; Y1 - Geometry Factor:3.01; Pre Install Clearance Min:0.0037 in; Float:0.083 in; UPC Code:0883450366670; Full Timken Part Number:QVVFX16V212SB; C0 - Static Load:62500 lb; Dimension C:4.19 in; Pre Install Clearance Max:0.0047 in; Dimension L Fix:3.45 in; Shaft Size :2-3/4 in; |
| 62.25.1255.500.11.1503 Standard 5 Slewing Ring Bearings | Dimension D:15.0 in; Bearing UPC:013992027030; Seal Type:Felt Seal; Dimension X:1.7 in; Ca - Axial Load Rating:4990.69 lbf; Dimension W:1.7 in; Dimension B:10.0 in; Cr - Dynamic Load Rating:81606 lbf; Dimension P:1.0 in; Note:This product line wa; Dimension R:1.7 in; Support Type:Take-Up; Cor - Static Load Rating:111505 lbf; Dimension H:2.0 in; Dimension T:20.0 in; Dimension N:16.5 in; Bearing Number:LSE415BR; |
| 232.20.1000.013 Type 21/1200.2 Standard 5 Slewing Ring Bearings | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:38200 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:21900 lbf; Ab - Cage-Cone Frontface Clearance:0.08 in; Y1 - ISO Factor9:2.08; e - ISO Factor8:0.33; Design Units:Imperial; K - Factor7:1.8; Cg - Geometry Factor11:0.0898; db - Cone Backface Backing Diameter:3.58 in; B - Cone Width:1.8375 in; T - Bearing Width across Cones:4 in; |
| 62.20.0710.001.21.1503 Standard 5 Slewing Ring Bearings | L:2.559 in; Threads No. per Inch:12; Major Dia - B:4.778 in; d:3.937 in; Taper:1:12; F:0.115 in; A:4.344 in; G:0.433 in; Weight:2.45 lb; |
| 61.20.0744.575.01.1403 Standard 5 Slewing Ring Bearings | Outside Ring Width C:23.000 mm; Angle between Set Screws:90 º; Dimension B1:2.469 in; Bearing Type:Ball Bearing; Center of Bearing from End S:24.6 mm; Shaft Size d:1 13/16 in; Sub Series:1..KPPB2,3,4; Number of Set Screws:2; Lubrication Type:Non-Relubricatable; Inner Ring Width B:49.21 mm; Static Load Rating:5210 lbf; O.D. Type:Spherical OD; Seal Type:Shroud Seal; Dynamic Load Rating:8740 lbf; Weight:0.50 lb; |
| 62.30.1120.001.21.1504 Standard 5 Slewing Ring Bearings | K - Factor7:1.38; G2 - Heat Generation Factor (Rib-Roller End):41.1; a - Effective Center Location3:-2 mm; C0 - Static Radial Rating:264000 N; R - Cone Backface To Clear Radius1:2.030 mm; C - Cup Width:24.000 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:56300 N; r - Cup Backface To Clear Radius2:1.52 mm; Db - Cup Backface Backing Diameter:128.02 mm; Aa - Cage-Cone Backface Clearance:2.5 mm; |
| 60.45.0805.001.11.1504 Standard 5 Slewing Ring Bearings | Dimension J1 :27-13/16 in; Dimension L :32-3/4 in; Housing Width:9.3 in; Dimension J2 :25-1/8 in; Note:This product line wa; Dimension K :5-1/4 in; Bolt Size:4 x 1-1/2; Bearing UPC:013992033130; Maximum Speed:960 rpm; Dimension M :8-3/4 in; Bearing Type:Split Cylindrical Ex; Cor - Static Load Rating:341160 lbf; Dimension H2:21.35 in; Seal Type:Kevlar Packing Seal; Bearing Number:MSE708BX; |
| 161.25.1180.891.21.1503 Standard 5 Slewing Ring Bearings | Cg - Geometry Factor3:0.1285; C - Inner Ring Width:51.000 mm; C - Dynamic Radial Rating1:618000 N; Reference Thermal Speed Rating (Oil)2:1100; Bearing Weight:19.6 Kg; Tapered Bore:N; R - Inner Ring To Clear Radius4:2.0 mm; d:220 mm; Type:NU; r - Outer Ring To Clear Radius5:2.0 mm; da - Inner Ring Backing Diameter:244.000 mm; D:350.000 mm; B - Outer Ring Width:51.000 mm; Da - Outer Ring Backing Diameter:326.000 mm; |
| 161.16.0630.890.11.1503 Standard 5 Slewing Ring Bearings | Eng Internal Radial Clearance - Max:0.0039; Dimension A:4.41 in; Oil Lubrication - M/N Seal:1400 rpm; C0 - Static Load:87200 lb; Pre Install Clearance Min:0.0024 in; Dimension K:1.46 in; Eng Internal Radial Clearance - Min:0.0024; Dimension H:1.54 in; Full Timken Part Number:QMSN18J307SB; Grease Lubrication - M/N Seal:1400 rpm; Y1 - Geometry Factor:2.90; Grease Lubrication - T Seal:2000 rpm; Dimension L:4.29 in; |
| 61.25.1155.500.11.1503 Standard 5 Slewing Ring Bearings | Dynamic Load Rating:2380 lbf; O.D. Type:Spherical OD; Outside Ring Width C:12.000 mm; Shaft Size d:9/16 in; Static Load Rating:1070 lbf; Set Screw Size:1/4-20; Inner Ring Width B:27.78 mm; Dimension S1:23.4 mm; Radius r:0.6 mm; Sub Series:1..KRRB; Dimension B1:1.469 in; Dimension B2:0.531 in; Weight:0.50 lb; Angle between Set Screws:90 º; Series:Industrial; Seal Type:Shroud Seal; Number of Set Screws:2; |
| 232.20.1000.503 Type 21/1200.2 Standard 5 Slewing Ring Bearings | Weight:30 lb; Dimension F:8.35 in; Int Radial Clearance Reduction Max:0.0025 in; Dimension J (Bolt Size):0.625 in; Pre Install Clearance Min:0.0043 in; Adapter Sleeve Axial Movement Min:0.027 in; Dimension C:4.33 in; C0 - Static Load:71900 lb; Grease Lubrication - B/C/O Seal:1100 rpm; Housing Style:Four-Bolt Square Fla; Dimension E:6.68 in; Dimension BC:9.45 in; Locking Style:Tapered Adapter; Dimension N:2.7500 in; |
| No. | Brand | D | k | b | U | e | t | E | J |
| 61.25.0980.891.21.1503 | Standard 5 | 235.000 mm | - | - | - | - | - | - | - |
| 232.20.0800.013 Type 21/950.2 | Standard 5 | 2.953 in | - | - | 24.824 in | - | - | 27.125 in | - |
| 61.20.0560.101.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.20.1000.013 Type 21/1200.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.20.0600.013 Type 21/750.2 | Standard 5 | 35.0000 mm | - | - | - | - | - | - | - |
| 61.25.1120.001.21.1504 | Standard 5 | 63.500 mm | - | - | - | - | - | - | - |
| 280.30.1275.013 Type 110/1400. | Standard 5 | 857.250 mm | - | - | - | - | - | - | - |
| 60.20.0944.500.01.1503 | Standard 5 | - | 86.5 mm | - | - | - | 1.8 mm | 10 mm | - |
| 230.20.0700.013 Type 21/850. | Standard 5 | - | - | - | - | - | - | - | - |
| 62.25.1180.001.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.25.0764.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.25.1255.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.25.1355.500.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 230.20.0600.503 Type 21/750. | Standard 5 | 100.0000 mm | - | - | - | - | - | - | - |
| 12.25.1360.601.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.25.1250.101.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.25.1120.890.11.1503 | Standard 5 | - | - | - | - | 0.092 in | - | - | - |
| 161.25.0886.890.11.1503 | Standard 5 | 3.1510 in | - | - | - | - | - | - | - |
| 232.21.0875.013 Type 21/950.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.25.0764.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.20.0755.001.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.20.1360.001.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.20.1146.991.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.16.0630.890.11.1503 | Standard 5 | 250.0000 mm | - | - | - | - | - | - | - |
| 60.25.1055.500.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.25.1077.308.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.25.1154.990.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
281.30.0900.013 Type 110/1100.1 Standard 5 Slewing Ring Bearings Video
281.30.0900.013 Type 110/1100.1 Rothe Erde Slewing Ring
We supply 281.30.0900.013 Type 110/1100.1 slewing ring to customer according to Rothe Erde standard and specification, the quality of our product is same as
281.30.0900.013 Type 110/1100.1 Rothe erde slewing ring
Buy 281.30.0900.013 Type 110/1100.1 Rothe erde slewing ring from SJC slewing bearing Inc，TIMKEN slewing bearing Distributor online Service suppliers
China Slewing Ring Bearings for Steel Mills (281.30.1200.013
281.30.0900.013 (Type 110/1100.1) 281.30.1000.013 (Type 110/1200.1) 281.30.1100.013 (Type 110/1300.1) 281.30.1200.013 (Type 110/1400.1)
Buy 281.30.0900.013 Type 110/1100.1 Four-point contact ball
Buy 281.30.0900.013 Type 110/1100.1 Four-point contact ball slewing rings from EF SLEWING BEARING CO., LTD.，thyssenkrupp rothe erde slewing bearing
281.30.0900.013 Type 110/1100.1 Rothe erde slewing bearing
Buy 281.30.0900.013 Type 110/1100.1 Rothe erde slewing bearing from Wanda Slewing Bearing Supplier，Thyssenkrupp Rotary Slewing Bearing Distributor
China Light Types Flanged Slewing Ring Bearings Turtable
China Light Types Flanged Slewing Ring Bearings Turtable Bearing 110/1300 for Truck, Find details about China ... 281.30.0900.013 (Type 110/1100.1)
281.30.0900.013 Type 110/1100.1 bearing, Light load slewing
high quantities 281.30.0900.013 Type 110/1100.1 Bearing dimension: 805x1096.2x90, Enquiry for global 281.30.0900.013 Type 110/1100.1 Light load slewing