| RKS.060.25.1534 SKF Slewing Ring Bearings | Ball Material:Steel; Bearing Inner Ring Material:Steel; Flinger Material:None; Bearing Outer Ring Material:Steel; Ring Size:Standard; Bearing Locking Device:Setscrew; Base to Center Height:Not Applicable; Ball Grade:Class 10; Bearing Bore Shape:Round; End Cap Groove:No; d:0.7500 in; Flinger Type:None; Ship Weight:1 LB; Seal Type:Single Lip; Ball Bearing Housing Series:204 Series; Grease Type:Unirex N2; |
| RKS.062.25.1534 SKF Slewing Ring Bearings | Oil rpm:12000; fo:15.5; LangID:1; yobi:7011CDT; d:55; ALP21:15; hidTable:ecat_NSANGB; C:55.5; ALPHA_:15; SRI:5.37; da:62; D_a:83; 2B_:36; DE_:82.78; r:1.1; KBRG:7314; r1:0.6; GRS rpm:9000; mass:0.86; SBRG:10; |
| VI160288-N INA Slewing Ring Bearings | F:415 mm; da min.:391 mm; Basic static load rating C0:3000 kN; r1,2 min.:2.1 mm; B:100 mm; Limiting speed:1000 r/min; Basic dynamic load rating C:968 kN; s max.:2 mm; Mass bearing:42.6 kg; Fatigue load limit Pu:270 kN; D:480 mm; Reference speed:900 r/min; Da max.:469 mm; ra max.:2 mm; d:380 mm; |
| VSA200744-N INA Slewing Ring Bearings | J1:95.25 mm; Eye bolt:2 x 3/8-16 UNC; P90°:138 kN; J min.:431.8 mm; J max.:463.55 mm; Initial grease fill:623.7 g; RG:3/4 NPT; h:50.8 mm; Da:269.999 mm; Ca:82.804 mm; Stabilizing ring:SR-30-0; Cap bolt recommended tightening torque:203.4 N·m; PG:1/4 NPT; P120°:87.2 kN; P60°:230 kN; H1:160.325 mm; Cap bolt, SAE grade:5; A2:215.9 mm; A1:158.75 mm; Mass pillow block:91.6 kg; |
| RKS.162.20.1904 SKF Slewing Ring Bearings | Screw Diameter:1.0000 in; Frame Size:200; Material Type:CARBON STEEL; Take-Up Frame Style:HEAVY DUTY; Special Coating:STANDARD PAINT; Screw Treatment:ZINC PLATED; Angle Size:3-1/2 X 3-1/2 X 5/16; UPC:782475266005; Take-Up Frame Travel:30.0000 in; Ship Weight:95 LB; |
| VSU250755 INA Slewing Ring Bearings | J min.:549.275 mm; Appropriate attachment bolt size G:1.25 in; H:401.637 mm; Cap bolt:4 x 7/8-9 UNC; Initial grease fill:1672.65 g; H1:200.025 mm; P150°:94.3 kN; A1:190.5 mm; Pa:59.6 kN; P60°:290 kN; Bearing limiting speed:2000 r/min; End plug (suffix Y):EPR 23; L:711.2 mm; ba:80.169 mm; Labyrinth ring:2 x LOR 165; P180°:113 kN; da:198.438 mm; Stabilizing ring:2 x 36053-140; Cap bolt recommended tightening torque:271.2 N·m; |
| A6-14E1 Rotek Slewing Ring Bearings | Retainer Type:Std Retainer; Grease Type:Unirex N2; d:30.0000 mm; Base to Center Height:Standard; Bearing Outer Ring Material:Steel; Bearing Duty:Normal Duty; Max Bearing Speed:6500 rpm; Bearing Inner Ring Material:Steel; Bearing Bore Shape:Round; Flinger Material:Steel; Ball Bearing Housing Series:206 Series; Housing Material:Cast Iron; Manufacturing Plant Location:Rogersville, TN; Housing Type:Wide Slot Take-Up; |
| VSA250755-N INA Slewing Ring Bearings | C1 max.:24 mm; Specific dynamic load factor K:100 N/mm²; r1 min.:0.6 mm; Material constant KM:330; G:M 42x3; dk:53 mm; l2 max.:194 mm; B:28 mm; α:7 °; d:40 mm; l7 min.:46 mm; d2 max.:94 mm; Basic dynamic load rating C:100 kN; Basic static load rating C0:140 kN; h:145 mm; l1 min.:76 mm; Mass rod end:2.11 kg; |
| XSA140844-N INA Slewing Ring Bearings | B:90 mm; B5:112 mm; Hydraulic nut:HMV 142E; d3:830 mm; B1:286 mm; G2:G 1/8; Mass adapter sleeve assembly:193 kg; G:Tr 710x7; d:710 mm; A:8 mm; d1:670 mm; G3:13 mm; |
| RKS.161.14.0414 SKF Slewing Ring Bearings | rs (min):2.1 mm; d:120 mm; with cylindrical bore:1 400 min-1; Dynamic (Cr):4.5 mm; Grease:803 kN; with tapered bore:1 700 min-1; Pu:564 kN; B:76 mm; Oil:83.890 kN; Static (Cor):8.3 mm; D:215 mm; |
| RKS.220541 SKF Slewing Ring Bearings | Self Aligning:Self Centering; Anti-Rotation Pin:Yes; End Cap Groove:Yes; Bearing Outer Ring Material:Steel; Seal Type:Triple Lip; Manufacturing Plant Location:Rogersville, TN; Bearing Series:204 Series; Grease Type:Mobilith SHC PM 220; Flinger Type:Rubberized; Bearing Inner Ring Material:Steel; Base to Center Height:Standard; Ball Grade:Class 10; Ring Size:Next Larger Ring Siz; Bearing Duty:Normal Duty; |
| RKS.210941 SKF Slewing Ring Bearings | r1 min.:1 mm; d:70 mm; Basic dynamic load rating C:315 kN; Specific dynamic load factor K:100 N/mm²; l3 min.:80 mm; w:80 mm; B:49 mm; d2 max.:162 mm; l7 min.:80 mm; Material constant KM:330; d4 ≈:92 mm; Basic static load rating C0:530 kN; l5 ≈:40 mm; dk:92 mm; Mass rod end:10.5 kg; h1:265 mm; α:6 °; C1 max.:43 mm; G:M 72x4; l4 max.:349 mm; |
| XSI140844-N INA Slewing Ring Bearings | dk:47 mm; l2 max.:174 mm; d2 max.:84 mm; C1 max.:22 mm; Basic static load rating C0:110 kN; h:130 mm; Basic dynamic load rating C:80 kN; r1 min.:0.6 mm; α:6 °; Material constant KM:330; B:25 mm; l1 min.:68 mm; l7 min.:40 mm; G:M 36x3; Mass rod end:1.3 kg; d:35 mm; Specific dynamic load factor K:100 N/mm²; |
| RKS.160.16.1204 SKF Slewing Ring Bearings | D:75 mm; d2:45 mm; Dynamic (Ca):57.3 kN; T:20 mm; Static (Coa):79.4 kN; rs (min):1 mm; a:17 mm; r2s (min):0.3 mm; C:15.5 mm; r1s (min):1 mm; Pu:9.680 kN; B:20 mm; |
| RKS.160.16.1314 SKF Slewing Ring Bearings | Permissible sliding velocity v min.:0.25 m/s; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v max.:5 m/s; Mass bushing:0.032 kg; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; B:30 mm; D:20 mm; d:14 mm; Tolerance housing:H7; Coefficient of friction µ max.:0.1; Specific dynamic load factor K:10 N/mm²; |
| RKS.160.14.0944 SKF Slewing Ring Bearings | Bearing Insert Material:Nickel-Coated Steel; Expansion Type:Non-Expansion; Seal Type:Triple Lip; Base to Center Height:Standard; Ball Bearing Housing Series:207 Series; Bearing Duty:Normal Duty; Housing Type:Tapped Base Pillow B; Housing Coating:No Coating; Bearing Bore Shape:Round; Ring Size:Standard; Ball Grade:Class 24; Flinger Type:INTERNAL RUBBER LIP; Bearing Outer Ring Material:Steel; Housing Material:Stainless Steel; |
| No. | Brand | G | s | J | r | A | L | e | a |
| XSI140644-N | INA | - | - | - | - | - | - | - | - |
| XSU140644 | INA | - | - | - | - | - | - | - | - |
| RKS.23 0841 | SKF | 44.882 mm | - | - | - | - | - | - | - |
| RKS.062.20.0744 | SKF | - | - | - | - | - | - | - | - |
| XSA140744-N | INA | 438.988 mm | - | - | - | - | - | - | - |
| RKS.062.25.1424 | SKF | - | - | - | - | - | - | - | - |
| RKS.062.20.0644 | SKF | - | - | - | - | - | - | - | - |
| RKS.161.20.1904 | SKF | - | - | - | - | - | - | - | - |
| RKS.160.16.1644 | SKF | - | 29.766 mm | - | - | 63.5 mm | 225.425 mm | - | - |
| RKS.23 0641 | SKF | - | - | - | - | - | - | - | - |
| RKS.062.30.1904 | SKF | - | - | - | - | - | - | - | - |
| RKS.210411 | SKF | - | - | - | - | - | 330.2 mm | - | - |
| RKS.061.20.0844 | SKF | - | - | - | - | - | - | - | - |
| RKS.220841 | SKF | - | - | - | - | - | - | - | - |
| L6-16P9ZD | Rotek | Tr 360x5 | - | - | - | 9 mm | - | - | - |
| XSU140744 | INA | - | - | - | - | - | - | - | - |
| A6-14E1 | Rotek | - | - | - | - | - | - | - | - |
| RKS.060.25.1204 | SKF | - | - | - | - | - | - | - | - |
| RKS.23 1091 | SKF | - | - | - | 4 | - | - | - | 146.5 |
| A9-24P2 | Rotek | - | - | - | - | - | 628.65 mm | - | - |
M4-12P4Z Rotek Slewing Ring Bearings Video
M4-12P4Z Highway trailer Slewing ring in stock, RFQ M4
M4-12P4Z Highway trailer Slewing ring in stock Suppliers Catalogue, China M4-12P4Z Highway trailer Slewing ring in stock manufacturers is good in quality
Rotek Incorporated Full-Line Catalog
Example: Model M4-12P4 complete with mounting holes becomes Model M4-12P4Z. There are 4 grease fittings, approximately equally spaced, that press-fit into
FAG M4-12P4 Angular Contact Ball Slewing Rings Bearing
FAG M4-12P4 Angular Contact Ball Slewing Rings Bearing Specification detailsBore 2148.1260R55.1 mmDimension KABT4B 334078 G/HA1VA901outer ring
M4-12P4Z - Rotek Slewing Rings Online Catalog | Lily Bearing
Find details about M4-12P4Z slewing rings, Choose from our selection of rotek bearings, including over 800 products in a wide range of styles and sizes
M412P4Z by ROTEK - Buy or Repair at Radwell
Product Description. ROTEK; M412P4Z; BEARING; AVAILABLE; SURPLUS; NEVER USED SURPLUS; 2 YEAR RADWELL WARRANTY. Weight: 10.00 lbs
Rotek M4-12P4Z Bearing|Size:15.9 * 9.3 * 13.6
Rotek M4-12P4Z Bearing|Size:15.9 * 9.3 * 13.6|Rotek size:15.9 * 9.3 * 13.6
M4-12P4Z bearing, Slewing ring bearings 9.3x15.9x1.65 for
high quantities M4-12P4Z Bearing dimension: 9.3x15.9x1.65, Enquiry for global M4-12P4Z Slewing ring bearings suppliers for Falkland Islands (Islas Malvinas)