| RKS.161.14.0544 SKF Slewing Ring Bearings | L:330.2 mm; Cap bolt:2 x 5/8-11 UNC; A1:88.9 mm; h:34.925 mm; End plug (suffix Y):EPR 9; H2:38.1 mm; A2:127 mm; Ca:45.796 mm; ba:35.719 mm; Cap bolt, SAE grade:8; S:4.763 mm; P150°:26.7 kN; P60°:78.7 kN; P120°:28.9 kN; R1:53.975 mm; Max. speed for PosiTrac Plus seal:1950 r/min; Mass pillow block:24.9 kg; Initial grease fill:110.56 g; Pa:9.25 kN; Housing:SSAFS 517; |
| VLA200414-N INA Slewing Ring Bearings | Fatigue load limit Pu:63 kN; Mass bearing (including seat washer where applicable):68.5 kg; Limiting speed:600 r/min; Basic dynamic load rating C:572 kN; r1,2 min.:2.1 mm; Da max.:1037 mm; d:1000 mm; Basic static load rating C0:5500 kN; d1 ≈:1086.5 mm; Reference speed:430 r/min; ra max.:2 mm; Minimum load factor A:160; D1 ≈:1003.5 mm; D:1090 mm; da min.:1053 mm; H:70 mm; |
| XU16026 INA Slewing Ring Bearings | Grease Type:Mobilgrease XHP222; d:2.4375 in; Bearing Insert Material:Steel; Ship Weight:60 LB; Split Housing:SPLIT; Shaft Attachment Type:SPECIAL DUTY; UPC:782475055371; Bearing Bore Shape:Tapered; Housing Type:4 Bolt Flange; Bearing Series:207 Series; Housing Product Type:SPECIAL DUTY; Expansion Type:Non-Expansion; Housing Series:207 SERIES (207 - 20; Seal Type:Piston Ring; |
| L6-16E9ZD Rotek Slewing Ring Bearings | l:46 mm; d1 ≈:161.77 mm; Cb min.:9.5 mm; D:215 mm; r5 min.:1 mm; Calculation factor Y0:1.6; Basic dynamic load rating C:716 kN; d:120 mm; Fatigue load limit Pu:98 kN; Mass bearing pair:15.7 kg; C:114 mm; rc max.:1 mm; T:133 mm; db min.:134 mm; b:10 mm; Basic static load rating C0:915 kN; K:7.5 mm; ra max.:3 mm; a:131.414 mm; Reference speed:2000 r/min; |
| RKS.060.20.0644 SKF Slewing Ring Bearings | Minimum load factor A:100; r1,2 min.:3 mm; Limiting speed:750 r/min; Basic dynamic load rating C:650 kN; ra max.:2.5 mm; Basic static load rating C0:4400 kN; H:85 mm; Mass bearing (including seat washer where applicable):58.5 kg; da min.:595 mm; Da max.:575 mm; D:640 mm; Reference speed:530 r/min; D1 ≈:534 mm; Fatigue load limit Pu:68 kN; d:530 mm; d1 ≈:636 mm; |
| VU200405 INA Slewing Ring Bearings | Flinger Type:Rubberized; Bearing Outer Ring Material:Steel; Bearing Insert Material:Steel; Housing Type:Tapped Base Pillow B; UPC:782475891153; Seal Type:Single Lip; Bearing Thread Type:UNC; d:2.0000 in; Retainer Type:Std Retainer; Bearing Inner Ring Material:Steel; Ring Size:Standard; Ball Material:Steel; Expansion Type:Non-Expansion; Grease Type:Unirex N2; Max Bearing Speed:4500 rpm; Bearing Bore Shape:Round; |
| XSI140944-N INA Slewing Ring Bearings | H:192.484 mm; Pa:8.1 kN; ba:34.925 mm; Max. speed for PosiTrac Plus seal:1800 r/min; RG:3/8 NPT; P60°:101 kN; H2:41.275 mm; Da:160 mm; h:38.1 mm; da:77.787 mm; P90°:60.9 kN; Appropriate attachment bolt size G:0.625 in; R2:27.781 mm; Mass pillow block:21.3 kg; Stabilizing ring:2 x SR-1518; PosiTrac Plus contact element:2 x B10724-188; Initial grease fill:286.33 g; PG:1/8 NPT; N1:19.05 mm; Cap bolt recommended tightening torque:149.1 N·m; |
| L4-17P8ZD Rotek Slewing Ring Bearings | b:9 mm; da min.:68.3 mm; α:6 °; rb max.:1 mm; B:55.55 mm; Lubricant:Regular relubricatio; d:63.5 mm; r2 min.:1 mm; Sealing solution:Triple-lip seals; Mass plain bearing:1.85 kg; M:6.5 mm; D:100.013 mm; ra max.:0.6 mm; Basic static load rating C0:1040 kN; Da max.:94.7 mm; da max.:72.3 mm; Specific static load factor K0:300 N/mm²; Specific dynamic load factor K:100 N/mm²; dk:91.186 mm; |
| VU36068 INA Slewing Ring Bearings | Calculation factor f2D:1.08; Preload class C GC:680 N; Calculation factor fHC:1; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (single, tandem) Y2:0.87; Reference grease quantity Gref:3.3 cm³; Basic static load rating C0:21.6 kN; Mass bearing:0.23 kg; B:16 mm; Calculation factor f2B:1.02; Static axial stiffness, preload class C:229 N/µm; ra max.:1 mm; Fatigue load limit Pu:0.9 kN; |
| RKS.211091 SKF Slewing Ring Bearings | LangID:1; d:95; X2:0.65; X1:1; Oil rpm:3600; e:0.23; KBRG:1352; cyl count:15; cyl dia:25.4; CAng:8.653; groove outer:175.61; Y3:2.8; Y0:2.9; hidYobi:1319K; yobi:1319K; D_a:187; SRI:13.72; PCD:148.5; da:108; Prod_Type3:SABB_SA_TB; |
| RKS.060.20.1094 SKF Slewing Ring Bearings | d:50 mm; B:70 mm; Mass bushing:0.38 kg; Coefficient of friction µ min.:0.05; Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; Tolerance shaft:h8; D:60 mm; Permissible sliding velocity v max.:5 m/s; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Permissible sliding velocity v min.:0.25 m/s; |
| VLU200844 INA Slewing Ring Bearings | Special Coating:STANDARD PAINT; Ship Weight:3.4 LB; Material Type:CARBON STEEL; Square Tubing Size:1.25 X 1.25 X 0.083; UPC:782476509514; Screw Diameter:0.6250 in; Frame Size:100; Take-Up Frame Style:TELESCOPING; Take-Up Frame Travel:6.0000 in; Screw Treatment:ZINC PLATED; |
| A14-25P1 Rotek Slewing Ring Bearings | B_:33; ra:2; Prod_Type3:CRB_SR_NUP; db min:89; hidTable:ecat_NSCLDR; SDM_:111.3; db max:93; Fw:95.3; d:80; SBRG:22; D_a max:131; D_:140; Oil rpm:5000; rb:2; TSR rpm:5000; Z_:18; KBRG:4162; r1:2; da:89; hidYobi:NUP2216ET; |
| VSU200844 INA Slewing Ring Bearings | H2:28 mm; J:210 mm; N1:18 mm; Calculation factor e:0.24; Basic dynamic load rating C:104 kN; Basic static load rating C0:108 kN; N:24 mm; Grub screws:3 x M 6; H1:70 mm; B:65 mm; J7:26 mm; Tightening torque for grub screws:8 N·m; L:255 mm; N4 max.:8 mm; Fatigue load limit Pu:11.8 kN; da:50 mm; Bearing mean diameter dm:70 mm; P0°:190 kN; Attachment bolt diameter G:16 mm; Pa:15 kN; |
| L6-22P9ZD Rotek Slewing Ring Bearings | ra max.:6 mm; d:420 mm; Calculation factor Y2:2.9; Mass bearing:519 kg; Calculation factor Y0:1.8; D1 ≈:676 mm; Fatigue load limit Pu:765 kN; D:760 mm; K:12 mm; b:22.3 mm; d2 ≈:500 mm; r1,2 min.:7.5 mm; Calculation factor e:0.35; Calculation factor Y1:1.9; Basic static load rating C0:11600 kN; B:272 mm; Limiting speed:128 r/min; Da max.:728 mm; Basic dynamic load rating C:7683 kN; |
| RKS.23 0841 SKF Slewing Ring Bearings | d3 max.:64.414 mm; B:11.379 mm; B1:39.98 mm; d1:36.513 mm; B4:12.598 mm; d:45 mm; Sleeve:S 9x1.7/16; Mass adapter sleeve assembly:0.28 kg; G:44.882 mm; Threads per inch:18; |
| No. | Brand | G | s | J | r | A | L | e | a |
| VLI200944-N | INA | - | - | - | - | 30 mm | 86 mm | - | - |
| RKS.161.16.1754 | SKF | M 60x4 | - | - | - | - | - | - | - |
| RKS.060.25.1424 | SKF | - | - | - | - | - | - | - | - |
| RKS.210841 | SKF | - | - | - | - | - | 158.75 mm | - | - |
| RKS.161.14.0414 | SKF | - | - | - | - | - | - | - | - |
| RKS.23 0741 | SKF | Tr 480x5 | - | - | - | 6.5 mm | - | - | - |
| RKS.160.16.1644 | SKF | - | 29.766 mm | - | - | 63.5 mm | 225.425 mm | - | - |
| XSU080398 | INA | - | - | 350 mm | - | - | 410 mm | - | - |
| M4-22P4Z | Rotek | - | - | - | - | - | - | - | 22.1 mm |
| L6-22N9Z | Rotek | - | - | - | - | - | - | - | - |
| VSA200544-N | INA | - | - | - | - | - | - | - | - |
| A6-14E1 | Rotek | - | - | - | - | - | - | - | - |
| RKS.160.14.0414 | SKF | - | - | - | - | - | - | - | - |
| M4-16P4Z | Rotek | - | - | - | - | - | - | - | - |
| RKS.162.20.1904 | SKF | - | - | - | - | - | - | - | - |
| XSU141094 | INA | - | - | - | - | - | - | - | - |
| XSI141094-N | INA | Tr 420x5 | - | - | - | 6.5 mm | - | - | - |
| RKS.160.16.1534 | SKF | Tr 460x5 | - | - | - | - | - | - | - |
| RKS.160.14.0944 | SKF | - | - | - | - | - | - | - | - |
| RKS.162.14.0944 | SKF | - | - | - | - | - | - | - | - |
| RKS.061.25.1204 | SKF | - | - | - | - | - | - | - | - |
| A8-19E5A | Rotek | - | - | - | - | - | - | - | - |
| A6-9P4 | Rotek | - | - | - | - | - | 330.2 mm | - | - |
RKS.161.16.1534 SKF Slewing Ring Bearings Video
bearing with out gears (rks. 161.16.1534)
2010101- Type: Slewing Bearing Brand Name: Raphael Bore internal gears or external gears, lubricant holes RKS.161.16.1424 RKS.161.16.1534 RKS
Slewing Ring Bearing RKS.161.16.1534 Suppliers and
High in quality and precision, reliable in stability, and long in lifespan, this slewing ring bearing rks.161.16.1534 of Sun Rises has already been sold to the
China Production Rks. 161.16.1534 Type High Load Slewing
China Production Rks. 161.16.1534 Type High Load Slewing Bearing, Find details about China Ball Bearing, Rolling Bearing from Production Rks. 161.16.1534
RKS.161.16.1534 Crossed Cylindrical Roller Slewing Bearing Price
Dismounting bearings RKS.161.16.1534 Crossed Cylindrical Roller Slewing Bearing Pricemounted on either adapter or withdrawal sleeves is also often a
RKS.161.16.1534 With external gear - JCB Bearing
Page 1. Luoyang JCB Bearing Technology Co., Ltd
RKS.161.16.1534 of RKS slewing bearing from China Suppliers
Quality RKS.161.16.1534 - find quality RKS slewing bearing, Slewing Bearings & RKS slewing bearing from Luoyang JCB Bearing Company of China Suppliers
Cross Roller Slewing Bearing with out Gears (RKS. 161.16.1534)
China Cross Roller Slewing Bearing with out Gears (RKS. 161.16.1534), Find details about China Slewing Bearing, Slewing Ring from Cross Roller Slewing