| VSA200744-N INA Slewing Ring Bearings | J1:95.25 mm; Eye bolt:2 x 3/8-16 UNC; P90°:138 kN; J min.:431.8 mm; J max.:463.55 mm; Initial grease fill:623.7 g; RG:3/4 NPT; h:50.8 mm; Da:269.999 mm; Ca:82.804 mm; Stabilizing ring:SR-30-0; Cap bolt recommended tightening torque:203.4 N·m; PG:1/4 NPT; P120°:87.2 kN; P60°:230 kN; H1:160.325 mm; Cap bolt, SAE grade:5; A2:215.9 mm; A1:158.75 mm; Mass pillow block:91.6 kg; |
| RKS.23 0841 SKF Slewing Ring Bearings | d3 max.:64.414 mm; B:11.379 mm; B1:39.98 mm; d1:36.513 mm; B4:12.598 mm; d:45 mm; Sleeve:S 9x1.7/16; Mass adapter sleeve assembly:0.28 kg; G:44.882 mm; Threads per inch:18; |
| A12-18E5 Rotek Slewing Ring Bearings | s:28 mm; r1,2 min.:1 mm; H1:31 mm; da min.:63 mm; C:8.5 mm; Reference speed:2800 r/min; H:28.5 mm; d1 ≈:78 mm; Limiting speed:4000 r/min; Mass bearing (including seat washer where applicable):0.67 kg; D:78 mm; D1 ≈:42 mm; D3:82 mm; Da max.:60 mm; ra max.:1 mm; Basic static load rating C0:122 kN; Minimum load factor A:0.077; d:40 mm; D2:60 mm; R:64 mm; |
| RKS.161.14.0414 SKF Slewing Ring Bearings | rs (min):2.1 mm; d:120 mm; with cylindrical bore:1 400 min-1; Dynamic (Cr):4.5 mm; Grease:803 kN; with tapered bore:1 700 min-1; Pu:564 kN; B:76 mm; Oil:83.890 kN; Static (Cor):8.3 mm; D:215 mm; |
| RKS.220841 SKF Slewing Ring Bearings | Mass bushing:2.22 kg; d:200 mm; Coefficient of friction µ min.:0.03; Tolerance housing:H7; Specific static load factor K0:200 N/mm²; Specific dynamic load factor K:140 N/mm²; Tolerance shaft:h8; Effective load carrying cross section A:35600 mm²; Coefficient of friction µ max.:0.08; B:180 mm; D:220 mm; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:0.5 m/s; |
| VSI200844-N INA Slewing Ring Bearings | End Cap Groove:No; Bearing Series:207 Series; Flinger Type:Rubberized; Ship Weight:2.8 LB; Bearing Bore Shape:Round; Grease Type:Unirex N2; Bearing Insert Material:Steel; Bearing Family:Eccentric Collar Bal; Retainer Type:Std Retainer; Flinger Material:Steel; Retainer Material:Nylon; Bearing Outer Ring Material:Steel; UPC:782475117987; Base to Center Height:Not Applicable; Manufacturing Plant Location:Rogersville, TN; |
| RKS.160.14.0414 SKF Slewing Ring Bearings | Tolerance housing:H7; D1:32 mm; Coefficient of friction µ max.:0.1; d:20 mm; B1:3 mm; Mass bushing:0.033 kg; Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; D:26 mm; Specific dynamic load factor K:10 N/mm²; B:20 mm; Specific static load factor K0:20 N/mm²; Tolerance shaft:h8; |
| XU080264 INA Slewing Ring Bearings | B:36 mm; r, r1,2 min.:0.6 mm; d:32 mm; Mass inner ring:0.12 kg; F:40 mm; |
| VI140326-V INA Slewing Ring Bearings | J:148.5 mm; Limiting speed:4300 r/min; Recommended diameter for attachment bolts, inch G:0.5625 in; DN:6.5 mm; Hexagonal key size for grub screw N:3.969 mm; B:49.2 mm; Db2:111 mm; A5:26.5 mm; s1:30.2 mm; A:39 mm; Da:98.4 mm; J7:18 mm; A1:14 mm; Db1:102 mm; Rα:45 °; Fatigue load limit Pu:0.915 kN; Thread grub screw G2:5/16-24 UNF; d:41.275 mm; N:16 mm; L:111 mm; |
| XSU140744 INA Slewing Ring Bearings | Dynamic (Cr):9 mm; Pu:2040 kN; Static (Cor):16.7 mm; with tapered bore:840 min-1; D:400 mm; d:220 mm; Oil:285.740 kN; rs (min):4 mm; Grease:3290 kN; B:144 mm; with cylindrical bore:710 min-1; |
| A8-17N4D Rotek Slewing Ring Bearings | Frame Size:400; Screw Diameter:1.0000 in; Angle Size:1-3/4 X 1-3/4 X 3/16; Ship Weight:20.78 LB; Screw Treatment:ZINC PLATED; Material Type:CARBON STEEL; Take-Up Frame Style:WIDE SLOT; Take-Up Frame Travel:18.0000 in; Special Coating:STANDARD PAINT; UPC:782475583713; |
| VA250309-N INA Slewing Ring Bearings | Retainer Material:Nylon; Base to Center Height:Not Applicable; Anti-Rotation Pin:Yes; Ball Bearing Housing Series:206 Series; Expansion Type:Non-Expansion; Manufacturing Plant Location:Rogersville, TN; Bearing Duty:Intermediate Duty; Max Bearing Speed:6500 rpm; Grease Type:Unirex N2; Flinger Type:None; Bearing Outer Ring Material:Steel; Bearing Locking Device:Setscrew; Housing Type:2 Bolt Flange; Housing Material:Cast Iron; |
| RKS.220641 SKF Slewing Ring Bearings | Static axial stiffness, preload class C:119 N/µm; Calculation factor f2D:1.08; D2:42.17 mm; da max.:31.6 mm; d1:32.1 mm; ra max.:0.6 mm; Basic dynamic load rating C:9.23 kN; d:25 mm; Calculation factor f2A:1; D:47 mm; Calculation factor f2B:1.02; r1,2 min.:0.6 mm; a:14.5 mm; rb max.:0.3 mm; Calculation factor e:0.68; Calculation factor fHC:1.02; Calculation factor f2C:1.05; Da max.:43.8 mm; Calculation factor (single, tandem) Y2:0.87; |
| VSA200944-N INA Slewing Ring Bearings | LangID:1; TSR rpm:5600; dd min:86; KBRG:4152; Fw:77; da:71; C:222; Macha rpm:8500; db max:75; hidTable:ecat_NSCLDR; C_conv:222000; mass:2.76; yobi:NJ2312ET; DA_:19; B_:46; DE_:115; ra:2; D_a max:119; C0:262; d:60; |
| RKS.210741 SKF Slewing Ring Bearings | N4 max.:40 mm; Ca:260 mm; P180°:4200 kN; da:430 mm; Appropriate attachment bolt, size G:42 mm; Oil level, min.:103 mm; H:880 mm; Q120°:5800 kN; P90°:5200 kN; Mass housing:859 kg; Appropriate attachment bolt, rec. tightening torque:3640 N·m; P120°:3800 kN; P0°:8400 kN; J6:1160 mm; A1:440 mm; Q180°:2900 kN; N:60 mm; Oil level, max.:131 mm; J:1070 mm; N1:48 mm; |
| VU300574 INA Slewing Ring Bearings | Max. speed for Taconite seal:1050 r/min; Appropriate attachment bolt size G:0.75 in; A2:198.438 mm; H1:95.25 mm; Ca:42.799 mm; Cap bolt, SAE grade:5; P60°:84.5 kN; Pa:7.12 kN; h:36.513 mm; End plug (suffix Y):EPR 9; PG:1/8 NPT; Cap bolt recommended tightening torque:149.1 N·m; Initial grease fill:218.29 g; RG:3/8 NPT; H2:31.75 mm; J max.:279.4 mm; Housing:SAF 517; Da:150 mm; Taconite seal:TER 54; |
| No. | Brand | G | s | J | r | A | L | e | a |
| L6-16P9Z | Rotek | - | - | 105 mm | - | 32 mm | - | - | - |
| XSU080398 | INA | - | - | 350 mm | - | - | 410 mm | - | - |
| XU08043 | INA | - | - | - | 1 | - | - | - | - |
| RKS.901175101001 | SKF | - | - | - | - | - | - | - | - |
| L4-17P9Z | Rotek | - | - | - | 1 | - | - | - | - |
| XA200352-H | INA | - | - | - | - | - | - | - | - |
| M4-12P4Z | Rotek | - | - | - | - | - | - | - | - |
| VLU200544 | INA | - | - | 53 mm | - | - | - | - | 73 mm |
| RKS.062.20.0544 | SKF | - | - | - | - | - | - | - | - |
| L6-16P9ZD | Rotek | Tr 360x5 | - | - | - | 9 mm | - | - | - |
| RKS.161.16.1644 | SKF | - | - | - | - | - | - | - | - |
| VSA250755-N | INA | M 42x3 | - | - | - | - | - | - | - |
| RKS.427050403001 | SKF | - | - | - | - | - | - | - | - |
| RKS.062.20.0644 | SKF | - | - | - | - | - | - | - | - |
| VA160302-N | INA | - | - | 94 mm | - | - | - | - | 135 mm |
| VLI200414-N | INA | - | - | - | - | - | - | - | - |
| RKS.061.25.1644 | SKF | - | - | - | - | - | - | - | - |
| RKS.220641 | SKF | - | - | - | - | - | - | - | 14.5 mm |
| RKS.161.14.0414 | SKF | - | - | - | - | - | - | - | - |
| RKS.061.20.1094 | SKF | - | 32.941 mm | - | - | 88.9 mm | 266.7 mm | - | - |
| VSI250855-N | INA | - | - | - | 1 | - | - | - | - |
| VSA200744-N | INA | - | - | - | - | - | - | - | - |
| RKS.324012324001 | SKF | - | - | - | - | - | - | - | - |
| A13-22P4 | Rotek | - | - | - | - | - | - | - | 49.591 mm |
| VSU250855 | INA | - | - | - | - | - | - | - | - |
| RKS.061.25.1204 | SKF | - | - | - | - | - | - | - | - |
| RKS.204040101001 | SKF | - | - | - | 3 | - | - | - | - |
RKS.161.16.1424 SKF Slewing Ring Bearings Video
bearing with out gears (rks. 161.16.1534)
2010101- Type: Slewing Bearing Brand Name: Raphael Bore internal gears or external gears, lubricant holes RKS.161.16.1424 RKS.161.16.1534 RKS
RKS Cross roller - manufactutere of quality slewing bearing
RKS Cross roller External gear Drawing No. Ball track dia. ... Cross roller. RKS Cross roller slewing ring bearing ... RKS.161.16.1424, 1424, 182, 1558, 1339, 68
China Slewing Ring Rks. 161.16.1424 Model Four-Point Contact
China Slewing Ring Rks. 161.16.1424 Model Four-Point Contact Ball Bearing, Find details about China Rolling Bearing, Crane Bearing from Slewing Ring Rks
Slewing Ring Bearing RKS.161.16.1424 Suppliers and
High in quality and precision, reliable in stability, and long in lifespan, this slewing ring bearing rks.161.16.1424 of Sun Rises has already been sold to the
RKS.161.16.1424 Drawing of RKS slewing bearing Luoyang JCB
RKS.161.16.1424 Drawing of RKS slewing bearing Luoyang JCB Bearing Technology Company
RKS.161.16.1424 crossed roller Slewing bearing with external
Quality crossed roller slewing bearing manufacturers & exporter - buy RKS.161.16.1424 crossed roller Slewing bearing with external gear ,1339x1558x68 mm
RKS.161.16.1424 bearing, Crossed roller slewing bearings
high quantities RKS.161.16.1424 Bearing dimension: 1339x1558x68, Enquiry for global RKS.161.16.1424 Crossed roller slewing bearings (External gear type)