| A14-22E1B Rotek Slewing Ring Bearings | Z_:13; d:90; Fw:113.5; C0:535; SDM_:141.5; Macha rpm:5600; B_:64; yobi:NU2318ET7; DA_:28; Oil rpm:3400; C:435; TSR rpm:4000; KBRG:4142; rb:2.5; r1:3; D_a max:177; hidYobi:NU2318ET7; DE_:169.5; r:3; C_conv:435000; |
| A6-11E4 Rotek Slewing Ring Bearings | Tolerance shaft:h8; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ max.:0.1; Specific dynamic load factor K:10 N/mm²; Tolerance housing:H7; Specific static load factor K0:20 N/mm²; B:8 mm; Mass bushing:0.006 kg; D:14 mm; d:8 mm; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ min.:0.05; |
| VSA200844-N INA Slewing Ring Bearings | Bearing Family:Setscrew Ball Bearin; Ball Bearing Housing Series:216 Series; Shaft Attachment (2):Set Screw; Grease Type:Unirex N2; Flinger Material:Steel; Seal Type:Single Lip; Ring Size:Standard; Max Bearing Speed:2500 rpm; UPC:782475814817; Bearing Insert Material:Steel; Housing Type:2 Bolt Pillow Block; Housing Material:Cast Iron; Bearing Series:216 Series; Anti-Rotation Pin:Yes; Ball Grade:Class 10; |
| RKS.061.20.1094 SKF Slewing Ring Bearings | s:32.941 mm; Mass bearing unit:8.62 kg; Limiting speed:3100 r/min; J1:47.625 mm; B:65.484 mm; S:0.794 mm; H1:69.85 mm; da:61.913 mm; Basic dynamic load rating C:193 kN; Attachment bolt diameter G:15.875 mm; H:144.463 mm; J min.:209.55 mm; A:88.9 mm; J max.:225.425 mm; H2:41.275 mm; L:266.7 mm; |
| VSI200744-N INA Slewing Ring Bearings | A:43 mm; N:17 mm; Hexagonal key size for grub screw N:4.763 mm; B:51.6 mm; J:157 mm; Recommended tightening torque for grub screw:16.5 N·m; A5:42.3 mm; A1:21 mm; B4:9 mm; Basic static load rating C0:23.2 kN; d:49.213 mm; H:197 mm; Thread grub screw G2:3/8-24 UNF; s1:32.6 mm; Fatigue load limit Pu:0.98 kN; Limiting speed:2200 r/min; Mass bearing unit:1.15 kg; T:57.6 mm; Housing material:Composite for food a; |
| VSA250855-N INA Slewing Ring Bearings | H2:44.45 mm; Da:180 mm; da:103.188 mm; RG:3/8 NPT; Ca:55.804 mm; Mass pillow block:39 kg; Taconite seal:TER 111; Appropriate attachment bolt size G:0.75 in; N1:22.225 mm; Stabilizing ring:2 x 38151-24; Pa:16.7 kN; L:387.35 mm; A1:111.125 mm; A2:222.25 mm; R1:65.088 mm; P180°:71.2 kN; h:40.481 mm; H:222.25 mm; Cap bolt:5/8-11 UNC; P60°:175 kN; |
| RKS.060.20.0644 SKF Slewing Ring Bearings | Minimum load factor A:100; r1,2 min.:3 mm; Limiting speed:750 r/min; Basic dynamic load rating C:650 kN; ra max.:2.5 mm; Basic static load rating C0:4400 kN; H:85 mm; Mass bearing (including seat washer where applicable):58.5 kg; da min.:595 mm; Da max.:575 mm; D:640 mm; Reference speed:530 r/min; D1 ≈:534 mm; Fatigue load limit Pu:68 kN; d:530 mm; d1 ≈:636 mm; |
| RKS. 512080101001 SKF Slewing Ring Bearings | with tapered bore:710 min-1; Static (Cor):22.3 mm; Pu:2760 kN; Grease:4220 kN; B:165 mm; d:260 mm; with cylindrical bore:600 min-1; rs (min):6 mm; Dynamic (Cr):12 mm; D:540 mm; Oil:339.530 kN; |
| VA160302-N INA Slewing Ring Bearings | J:94 mm; H1:36 mm; Preload:4890 N; d2:62.1 mm; Required attachment bolt size (DIN 912):M8; da min.:56 mm; r1,2 min.:0.6 mm; ra max.:0.6 mm; D:115 mm; H:46 mm; N:8.8 mm; Static axial stiffnes:1240 N/µm; Da max.:80 mm; Basic dynamic load rating C:80 kN; a:135 mm; Basic static load rating C0:176 kN; Fatigue load limit Pu:6.4 kN; d:40 mm; Attainable speed:3400 r/min; Mass bearing:2.6 kg; |
| VLI200744-N INA Slewing Ring Bearings | Grease Type:Mobilith SHC PM 220; Max Bearing Speed:4000 rpm; Shaft Attachment (2):Eccentric Collar; d:1.5000 in; Base to Center Height:Not Applicable; Bearing Outer Ring Material:Steel; Ball Grade:Class 10; Flinger Type:Rubberized; Bearing Series:208 Series; Manufacturing Plant Location:Rogersville, TN; End Cap Groove:Yes; Housing Type:2 Bolt Flange; Bearing Family:Eccentric Collar Bal; Ship Weight:4.3 LB; |
| RKS.160.20.1904 SKF Slewing Ring Bearings | Ball Material:440 STAINLESS STEEL; Bearing Thread Size:3/8 - 16; Flinger Type:Standard; Shaft Attachment (2):D-Lock; Grease Type:Mobilgrease FM222; Max Bearing Speed:6000 rpm; Ship Weight:0.62 LB; Expansion Type:Non-Expansion; Base to Center Height:Standard; d:1.0000 in; Retainer Type:Max Life Cage; Bearing Locking Device:Concentric Clamp Col; Bearing Bore Shape:Round; Ball Bearing Housing Series:205 Series; |
| VSA200414-N INA Slewing Ring Bearings | Retainer Material:Polymer; Expansion Type:Non-Expansion; Ball Bearing Housing Series:205 Series; Bearing Insert Material:Nickel-Coated Steel; Bearing Inner Ring Material:Steel; Ship Weight:0.73 LB; Ball Material:440 STAINLESS STEEL; Max Bearing Speed:6000 rpm; End Cap Groove:Yes; Housing Material:Polymer; Housing Coating:No Coating; Base to Center Height:Not Applicable; Bearing Bore Shape:Round; Seal Type:Triple Lip; |
| VSA201094-N INA Slewing Ring Bearings | Shaft Attachment Type:SPECIAL DUTY; UPC:782475054497; Grease Type:Mobilgrease XHP222; Expansion Type:Non-Expansion; Ship Weight:33.68 LB; Split Housing:SPLIT; Housing Series:115 SERIES (114 - 20; Bearing Series:115 Series; Housing Type:4 Bolt Flange; Bearing Bore Shape:Tapered; d:1.9375 in; Seal Type:Piston Ring; Housing Product Type:SPECIAL DUTY; Bearing Insert Material:Steel; |
| RKS.061.25.1204 SKF Slewing Ring Bearings | Split Housing:SPLIT; Housing Series:207 SERIES (204 - 20; UPC:782475725250; Bearing Bore Shape:Tapered; Seal Type:Triple Lip; d:2.5000 in; Housing Type:4 Bolt Flange; Bearing Insert Material:Steel; Setscrew Angle:65; Shaft Attachment Type:SETSCREW; Expansion Type:Non-Expansion; Housing Product Type:K / DI; Bearing Locking Device:Setscrew; Ship Weight:21.7 LB; Bearing Series:207 Series; Grease Type:Mobilgrease XHP222; |
| M4-22P4 Rotek Slewing Ring Bearings | Limiting speed:3800 r/min; A1:13.5 mm; N:12.7 mm; Basic dynamic load rating C:16.3 kN; Mass bearing unit:0.96 kg; B4:5 mm; Recommended tightening torque for grub screw:4 N·m; Basic static load rating C0:11.2 kN; Db1:74.1 mm; RG:1/4-28 UNF; Fatigue load limit Pu:0.475 kN; d:30.162 mm; A5:30 mm; Db2:79.4 mm; Thread grub screw G2:1/4-28 UNF; L:79.4 mm; T:42 mm; Recommended diameter for attachment bolts, mm G:10 mm; |
| RKS.160.14.0414 SKF Slewing Ring Bearings | Tolerance housing:H7; D1:32 mm; Coefficient of friction µ max.:0.1; d:20 mm; B1:3 mm; Mass bushing:0.033 kg; Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; D:26 mm; Specific dynamic load factor K:10 N/mm²; B:20 mm; Specific static load factor K0:20 N/mm²; Tolerance shaft:h8; |
| No. | Brand | G | s | J | r | A | L | e | a |
| XSU080258 | INA | - | - | - | - | - | - | - | - |
| A13-22P4 | Rotek | - | - | - | - | - | - | - | 49.591 mm |
| VSA250955-N | INA | - | - | - | - | - | - | - | - |
| RKS. 314310101001 | SKF | - | - | - | - | - | - | - | - |
| RKS.161.16.1754 | SKF | M 60x4 | - | - | - | - | - | - | - |
| RKS.160.14.0644 | SKF | - | - | - | 0.6 | - | - | - | - |
| L6-22N9ZD | Rotek | - | - | - | - | - | - | - | - |
| RKS. 312410102001 | SKF | - | - | - | - | - | - | - | - |
| XSI140544-N | INA | - | - | - | - | - | - | - | - |
| RKS.210841 | SKF | - | - | - | - | - | 158.75 mm | - | - |
| VSI200944-N | INA | - | - | - | - | - | - | - | - |
| VSA200414-N | INA | - | - | - | - | - | - | - | - |
| VLA200644-N | INA | Tr 420x5 | - | - | - | 4 mm | - | - | - |
| RKS.220941 | SKF | - | - | - | - | - | - | - | - |
| XSU080398 | INA | - | - | 350 mm | - | - | 410 mm | - | - |
| VU200405 | INA | - | - | - | - | - | - | - | - |
| RKS.162.16.1424 | SKF | - | - | - | - | - | - | - | - |
| XSI140844-N | INA | M 36x3 | - | - | - | - | - | - | - |
| RKS.121390101002 | SKF | - | - | - | - | - | - | - | - |
| A8-22E6 | Rotek | M 16x1.5 | - | - | - | - | - | - | - |
| VI160288-N | INA | - | - | - | - | - | - | - | - |
| RKS.061.30.1904 | SKF | - | - | - | - | - | - | - | - |
| XU08043 | INA | - | - | - | 1 | - | - | - | - |
| VSU200744 | INA | - | - | - | - | - | - | - | - |
| L6-16E9Z | Rotek | - | - | - | 9.5 | - | - | - | - |
| A14-24P1A | Rotek | - | - | - | - | - | - | - | - |
| RKS.060.25.1424 | SKF | - | - | - | - | - | - | - | - |
| RKS.061.20.0944 | SKF | - | - | - | - | - | - | - | - |
| RKS.060.25.1534 | SKF | - | - | - | - | - | - | - | - |
| A8-22P11 | Rotek | - | - | - | - | - | - | - | - |
RKS.060.20.1094 SKF Slewing Ring Bearings Video
offer RKS.060.20.1094 four point contact ball slewing ring
Quality Four point contact ball slewing bearing manufacturers & exporter - buy offer RKS.060.20.1094 four point contact ball slewing ring bearings China
RKS.060.20.1094 SKF • ABF Store
RKS.060.20.1094 SKF available at ABF.store ✓ Same-day shipment ✓ 7.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
SKF RKS.060.20.0644 slewing bearing without gear
RIGIA specialized in SKF model RKS.060.20.0644 slewing bearing without gear, it's four ... RKS.060.20.1094, 1094, 1166, 1022, 56, 1140, 1048, 303, 2710, 77
RKS.060.20.0544 four point contact ball slewing bearing
RIGIA specialized in SKF structure RKS.060.20.0544 four point contact ball slewing ... RKS.060.20.1094, 1094, 1166, 1022, 56, 1140, 1048, 303, 2710, 77
RKS.060.20.1094 Drawing of RKS slewing bearing Luoyang
RKS.060.20.1094 Drawing of RKS slewing bearing Luoyang JCB Bearing Technology Company
Slewing Ring Bearing RKS.060.20.1094 Suppliers and
High in quality and precision, reliable in stability, and long in lifespan, this slewing ring bearing rks.060.20.1094 of Sun Rises has already been sold to the
RKS.060.20.1094 four point contact ball slewing ring 1022*1116
RKS.060.20.1094 slewing ring belongs to SKF medium size four point contact ball bearings. With no gear teeth, suitable for light to medium-duty arrangements