| RKS.062.25.1534 SKF Slewing Ring Bearings | Oil rpm:12000; fo:15.5; LangID:1; yobi:7011CDT; d:55; ALP21:15; hidTable:ecat_NSANGB; C:55.5; ALPHA_:15; SRI:5.37; da:62; D_a:83; 2B_:36; DE_:82.78; r:1.1; KBRG:7314; r1:0.6; GRS rpm:9000; mass:0.86; SBRG:10; |
| RKS.162.20.1904 SKF Slewing Ring Bearings | Screw Diameter:1.0000 in; Frame Size:200; Material Type:CARBON STEEL; Take-Up Frame Style:HEAVY DUTY; Special Coating:STANDARD PAINT; Screw Treatment:ZINC PLATED; Angle Size:3-1/2 X 3-1/2 X 5/16; UPC:782475266005; Take-Up Frame Travel:30.0000 in; Ship Weight:95 LB; |
| VSI200544-N INA Slewing Ring Bearings | Lubrication adapter:AP 14; B2:15 mm; B:100 mm; D:90 mm; M:8 mm; C:35 mm; d:30 mm; B1:63 mm; Grease fitting:NIP A3x9.5; Fatigue load limit Pu:9.5 kN; G1:32 mm; Hexagonal nut:M 30x1.5; d1:53 mm; Recommended tighthening torque:450 N·m; r1,2 min.:1.1 mm; Basic static load rating C0:76.5 kN; Maximum dynamic radial loads Fr max.:160 kN; G:M 30x1.5; Mass cam follower:1.95 kg; Maximum static radial loads F0r max.:228 kN; |
| VSU250755 INA Slewing Ring Bearings | J min.:549.275 mm; Appropriate attachment bolt size G:1.25 in; H:401.637 mm; Cap bolt:4 x 7/8-9 UNC; Initial grease fill:1672.65 g; H1:200.025 mm; P150°:94.3 kN; A1:190.5 mm; Pa:59.6 kN; P60°:290 kN; Bearing limiting speed:2000 r/min; End plug (suffix Y):EPR 23; L:711.2 mm; ba:80.169 mm; Labyrinth ring:2 x LOR 165; P180°:113 kN; da:198.438 mm; Stabilizing ring:2 x 36053-140; Cap bolt recommended tightening torque:271.2 N·m; |
| L6-16E9ZD Rotek Slewing Ring Bearings | l:46 mm; d1 ≈:161.77 mm; Cb min.:9.5 mm; D:215 mm; r5 min.:1 mm; Calculation factor Y0:1.6; Basic dynamic load rating C:716 kN; d:120 mm; Fatigue load limit Pu:98 kN; Mass bearing pair:15.7 kg; C:114 mm; rc max.:1 mm; T:133 mm; db min.:134 mm; b:10 mm; Basic static load rating C0:915 kN; K:7.5 mm; ra max.:3 mm; a:131.414 mm; Reference speed:2000 r/min; |
| XSA140744-N INA Slewing Ring Bearings | Mass adapter sleeve assembly:86.5 kg; B5:73.812 mm; d1:419.1 mm; B:60.579 mm; d3 max.:520.827 mm; Threads per inch:5; Sleeve:S 3288x16.1/2; d:440 mm; B1:354.152 mm; G:438.988 mm; Hydraulic nut:HMVC 88E; |
| VSA250855-N INA Slewing Ring Bearings | H2:44.45 mm; Da:180 mm; da:103.188 mm; RG:3/8 NPT; Ca:55.804 mm; Mass pillow block:39 kg; Taconite seal:TER 111; Appropriate attachment bolt size G:0.75 in; N1:22.225 mm; Stabilizing ring:2 x 38151-24; Pa:16.7 kN; L:387.35 mm; A1:111.125 mm; A2:222.25 mm; R1:65.088 mm; P180°:71.2 kN; h:40.481 mm; H:222.25 mm; Cap bolt:5/8-11 UNC; P60°:175 kN; |
| VSA250755-N INA Slewing Ring Bearings | C1 max.:24 mm; Specific dynamic load factor K:100 N/mm²; r1 min.:0.6 mm; Material constant KM:330; G:M 42x3; dk:53 mm; l2 max.:194 mm; B:28 mm; α:7 °; d:40 mm; l7 min.:46 mm; d2 max.:94 mm; Basic dynamic load rating C:100 kN; Basic static load rating C0:140 kN; h:145 mm; l1 min.:76 mm; Mass rod end:2.11 kg; |
| A6-14E1 Rotek Slewing Ring Bearings | Retainer Type:Std Retainer; Grease Type:Unirex N2; d:30.0000 mm; Base to Center Height:Standard; Bearing Outer Ring Material:Steel; Bearing Duty:Normal Duty; Max Bearing Speed:6500 rpm; Bearing Inner Ring Material:Steel; Bearing Bore Shape:Round; Flinger Material:Steel; Ball Bearing Housing Series:206 Series; Housing Material:Cast Iron; Manufacturing Plant Location:Rogersville, TN; Housing Type:Wide Slot Take-Up; |
| RKS.210941 SKF Slewing Ring Bearings | r1 min.:1 mm; d:70 mm; Basic dynamic load rating C:315 kN; Specific dynamic load factor K:100 N/mm²; l3 min.:80 mm; w:80 mm; B:49 mm; d2 max.:162 mm; l7 min.:80 mm; Material constant KM:330; d4 ≈:92 mm; Basic static load rating C0:530 kN; l5 ≈:40 mm; dk:92 mm; Mass rod end:10.5 kg; h1:265 mm; α:6 °; C1 max.:43 mm; G:M 72x4; l4 max.:349 mm; |
| RKS.162.16.1204 SKF Slewing Ring Bearings | Basic dynamic load rating C:212 kN; J:152.4 mm; N1:20.637 mm; S:0.794 mm; L:193.675 mm; Mass bearing unit:12.2 kg; A6:26.988 mm; da:76.2 mm; Attachment bolt diameter G:4 x 19.05; Limiting speed:2800 r/min; s:31.75 mm; a:6.35 mm; A:69.85 mm; A5:38.1 mm; |
| XSI140644-N INA Slewing Ring Bearings | r1,2 min.:3.3 mm; Basic static load rating C0:27500 kN; D:813.562 mm; Fatigue load limit Pu:1900 kN; d1 ≈:645 mm; Mass bearing:695 kg; Calculation factor Y2:2.7; T:479.425 mm; Thrust factor K:1.61; D1 ≈:735 mm; Calculation factor Y1:1.8; Comparative axial load rating CFa:457 kN; Basic dynamic load rating C:9680 kN; Calculation factor Y0:1.8; Calculation factor e:0.37; Design variant/feature:TQOS/GWISI; |
| RKS.061.20.1094 SKF Slewing Ring Bearings | s:32.941 mm; Mass bearing unit:8.62 kg; Limiting speed:3100 r/min; J1:47.625 mm; B:65.484 mm; S:0.794 mm; H1:69.85 mm; da:61.913 mm; Basic dynamic load rating C:193 kN; Attachment bolt diameter G:15.875 mm; H:144.463 mm; J min.:209.55 mm; A:88.9 mm; J max.:225.425 mm; H2:41.275 mm; L:266.7 mm; |
| VLI201094-N INA Slewing Ring Bearings | Housing Coating:Powder Coat; Max Bearing Speed:3500 rpm; Grease Type:DuPont Krytox GPL 20; Bearing Series:211 Series; Seal Type:Shield; Retainer Type:Max Life Cage; d:2.1875 in; Expansion Type:Non-Expansion; Bearing Locking Device:Concentric Clamp Col; Bearing Inner Ring Material:Steel; Shaft Attachment (2):D-Lock; Flinger Type:Standard; Housing Type:2 Bolt Pillow Block; Ball Grade:Class 10; Bearing Duty:Normal Duty; |
| VA160302-N INA Slewing Ring Bearings | J:94 mm; H1:36 mm; Preload:4890 N; d2:62.1 mm; Required attachment bolt size (DIN 912):M8; da min.:56 mm; r1,2 min.:0.6 mm; ra max.:0.6 mm; D:115 mm; H:46 mm; N:8.8 mm; Static axial stiffnes:1240 N/µm; Da max.:80 mm; Basic dynamic load rating C:80 kN; a:135 mm; Basic static load rating C0:176 kN; Fatigue load limit Pu:6.4 kN; d:40 mm; Attainable speed:3400 r/min; Mass bearing:2.6 kg; |
| VSU200644 INA Slewing Ring Bearings | N4:2 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Thread grub screw G2:5/16-24 UNF; B:33 mm; Hexagonal key size for grub screw N:3.969 mm; Limiting speed:5300 r/min; B4:6 mm; Basic static load rating C0:15.3 kN; Fatigue load limit Pu:0.655 kN; T:44.3 mm; Recommended tightening torque for grub screw:6.5 N·m; A1:13 mm; H:156 mm; s1:23.3 mm; L:96 mm; J6:106 mm; R1:22 mm; SWN:7 mm; |
| No. | Brand | G | s | J | r | A | L | e | a |
| RKS.060.20.0744 | SKF | - | - | 75 mm | - | - | - | - | - |
| RKS.161.14.0744 | SKF | - | - | - | - | - | - | - | - |
| A14-18E1L | Rotek | - | - | - | - | - | - | - | - |
| RKS.060.25.1644 | SKF | M 90x2 | - | - | - | - | - | - | - |
| VSA200644-N | INA | - | - | - | - | - | - | - | - |
| VSU250755 | INA | - | - | - | - | - | 711.2 mm | - | - |
| VSI251055-N | INA | - | - | - | - | - | - | - | - |
| L6-16E9Z | Rotek | - | - | - | 9.5 | - | - | - | - |
| M4-12P4Z | Rotek | - | - | - | - | - | - | - | - |
| VSA200844-N | INA | - | - | - | - | - | - | - | - |
| XSA140644-N | INA | - | - | - | - | - | - | - | - |
| VI160420-N | INA | - | - | - | - | - | - | - | - |
| VSI200414-N | INA | - | - | - | - | - | - | - | - |
| RKS.062.20.1094 | SKF | - | - | - | - | - | - | - | - |
| RKS.162.14.0844 | SKF | M 52x3 | - | - | - | - | - | - | - |
| A8-22P11 | Rotek | - | - | - | - | - | - | - | - |
| L6-22N9ZD | Rotek | - | - | - | - | - | - | - | - |
| RKS.324012324001 | SKF | - | - | - | - | - | - | - | - |
| RKS.060.30.1904 | SKF | - | - | - | - | - | - | - | - |
| RKS.161.16.1314 | SKF | M 150x2 | - | - | - | - | - | - | - |
| RKS.210841 | SKF | - | - | - | - | - | 158.75 mm | - | - |
| VSU201094 | INA | - | - | - | - | - | 330.2 mm | - | - |
| RKS.161.16.1644 | SKF | - | - | - | - | - | - | - | - |
| VSI200844-N | INA | - | - | - | - | - | - | - | - |
| RKS. 512080101001 | SKF | - | - | - | - | - | - | - | - |
| XSU080258 | INA | - | - | - | - | - | - | - | - |
| XSI140414-N | INA | M 42x3 | - | - | - | - | - | - | - |
| RKS.121395101002 | SKF | Tr 1000x8 | - | - | - | - | - | - | - |
VSU250955 INA Slewing Ring Bearings Video
Four point contact bearings - VSU250955 - 2D drawings and
VSU250955. Four point contact bearings standard series 25, without gear teeth, lip seals on both sides. 2D drawings and 3D CAD models. Drawings for 2D CAD
VSU250955 | Lily Bearing
Part Number, VSU250955. di. Da. DaZT. Di. da. diZT. H. La. Li. na. ni. weight(w). Maximum permissible radial load against friction lock(Frper). Basic dynamic
Four point contact bearings - VSU250955 - medias
Four point contact bearings VSU250955, standard series 25, without gear teeth, lip seals. Radial load Axial load in one direction Axial load in two directions
VSU250955 INA • ABF Store
VSU250955 INA available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
Buy VSU250955 slewing bearing - URB slewing bearing
VSU250955 slewing bearing Engineering Calculator , 180mm Outside Diameter (mm): Open Type Seals or Shields: INA VSA20/VSI20/VSU20 Series Sle
VSU250955 bearing, Four point contact ball slewing bearings
high quantities VSU250955 Bearing VSU250955 dimension: 855x1055x63, Enquiry for global VSU250955 Four point contact ball slewing bearings (No gear
VSU250955 slewing bearing 855x1055x63mm - TradeBearings
VSU250955 Slewing Bearing 855x1055x63mm 855x1055x63- VSU250955 bearing,Seals Type:open,Material:Chrome stee,Precision Rating:P0,P6,P5,P4,P2