| XSU140744 INA Slewing Ring Bearings | Dynamic (Cr):9 mm; Pu:2040 kN; Static (Cor):16.7 mm; with tapered bore:840 min-1; D:400 mm; d:220 mm; Oil:285.740 kN; rs (min):4 mm; Grease:3290 kN; B:144 mm; with cylindrical bore:710 min-1; |
| XSA140544-N INA Slewing Ring Bearings | Basic dynamic load rating C:10500 kN; Fatigue load limit Pu:3100 kN; Reference speed:320 r/min; ra max.:8 mm; D1 ≈:686 mm; d1 ≈:840 mm; da min.:725 mm; r1,2 min.:9.5 mm; B:89 mm; C:116 mm; Mass bearing:650 kg; B1:228 mm; D:920 mm; Da max.:800 mm; H:236 mm; s:308 mm; Minimum axial load factor A:180; Basic static load rating C0:44000 kN; Limiting speed:630 r/min; d:530 mm; |
| RKS.160.16.1534 SKF Slewing Ring Bearings | d1:535 mm; B:75 mm; B5:95 mm; d2:498 mm; B3:20 mm; G:Tr 460x5; b:36 mm; Associated eyebolt for handling:M 10; d3:580 mm; Associated spanner:TMFN 80-500; Mass lock nut:45.5 kg; h:20 mm; |
| RKS. 313500404001 SKF Slewing Ring Bearings | Taconite seal (dc shaft position):TER 160; Taconite seal (db shaft position):TER 171; H2:95.25 mm; P120°:160 kN; R2:46.831 mm; ba:99.219 mm; H1:241.3 mm; Mass pillow block:274 kg; Stabilizing ring:SR-44-38; PG:1/4 NPT; N1:41.275 mm; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.5 in; Housing:SAF 338; dc:184.15 mm; J max.:708.025 mm; Pa:113 kN; R1:130.175 mm; H:474.663 mm; Cap bolt, SAE grade:5; |
| RKS.210541 SKF Slewing Ring Bearings | N4 max.:30 mm; N1:42 mm; A:395 mm; End cover:ETS 3172 R; bc:208.5 mm; Appropriate attachment bolt, rec. tightening torque:2280 N·m; J:840 mm; P180°:3000 kN; Ca:192 mm; J1:220 mm; Appropriate attachment bolt, size G:36 mm; da:380 mm; s:30 mm; Q120°:4200 kN; H2:120 mm; P55°:7700 kN; Oil seal:TSD 3080 U; H1:350 mm; ba min.:145 mm; Oil level, max.:98 mm; |
| RKS.204040101001 SKF Slewing Ring Bearings | KBRG:6101; fo:13.3; SBRG:3; DE_:180.838; ra:2.5; r:3; D_:200; SREX:0.065; B_:45; GRS rpm:3000; D_a:187; hidYobi:6319; yobi:6319; SRE:17.25; C_conv:153000; LangID:1; SDM_:147.5; SRIN:-0.065; Z_:8; d:95; |
| RKS.060.25.1314 SKF Slewing Ring Bearings | Housing Coating:Powder Coat; Pillow Block:STANDARD PLAIN WATER; Seal Type:Auxiliary Dust Seal; Liner Bore Size:1.6875 in; Heater Indicator:No heaters; Ship Weight:31.7 LB; Seal Size:1.6875 in; Base to Center Hight Numeric:3.1250 in; Liner Bore Type:STANDARD BORE TYPE; Housing Material:Cast Iron; Bearing Insert Material:Steel; Oil Pump Indicator:NO; Vibration Sensor Indicator:No; Housing Type:Standard Plain Water; |
| M5-16P1 Rotek Slewing Ring Bearings | Mass roller and cage thrust assembly:3.75 kg; Fatigue load limit Pu:285 kN; D:250 mm; Reference speed:630 r/min; Ea:162 mm; Roller and cage thrust assembly:K 89330 M; Basic dynamic load rating C:670 kN; Basic static load rating C0:3250 kN; Eb:244 mm; Limiting speed:1300 r/min; d:150 mm; Dw:19 mm; |
| RKS. 211440101001 SKF Slewing Ring Bearings | a:25.026 mm; Fatigue load limit Pu:22.8 kN; Calculation factor e:0.35; Da max.:135.5 mm; Mass bearing:1.19 kg; d1 ≈:124.1 mm; Db min.:140 mm; B:25 mm; r1,2 min.:1.5 mm; Dimension series:2CC; rb max.:1.5 mm; da max.:114 mm; Calculation factor Y:1.7; Ca min.:5 mm; Reference speed:3400 r/min; Calculation factor Y0:0.9; ra max.:1.5 mm; Limiting speed:4000 r/min; db min.:115 mm; Basic dynamic load rating C:149 kN; |
| VSI250755-N INA Slewing Ring Bearings | Self Aligning:Self Centering; Ball Material:Steel; Ring Size:Standard; Housing Coating:Powder Coat; Bearing Inner Ring Material:Steel; Bearing Duty:Intermediate Duty; Flinger Material:None; Grease Type:Unirex N2; Ball Grade:Class 10; UPC:782475511495; Max Bearing Speed:7500 rpm; Anti-Rotation Pin:Yes; Retainer Material:Nylon; Bearing Family:Setscrew Ball Bearin; Manufacturing Plant Location:Rogersville, TN; |
| VSI200544-N INA Slewing Ring Bearings | Lubrication adapter:AP 14; B2:15 mm; B:100 mm; D:90 mm; M:8 mm; C:35 mm; d:30 mm; B1:63 mm; Grease fitting:NIP A3x9.5; Fatigue load limit Pu:9.5 kN; G1:32 mm; Hexagonal nut:M 30x1.5; d1:53 mm; Recommended tighthening torque:450 N·m; r1,2 min.:1.1 mm; Basic static load rating C0:76.5 kN; Maximum dynamic radial loads Fr max.:160 kN; G:M 30x1.5; Mass cam follower:1.95 kg; Maximum static radial loads F0r max.:228 kN; |
| RKS.161.14.0844 SKF Slewing Ring Bearings | C:22.2; hidTable:ecat_NSRF; LangID:1; r:1; DA_:3.5; B_:25; C0:31; Prod_Type3:NRB_RF_FYCJS; F:34; hidYobi:FYCJS-25; SDM_:33.5; C_:24; d:25; D_:52; DI_:30; mass:0.275; yobi:FYCJS-25; KBRG:8553; SLR:12.8; Z_:19; |
| VI140326-V INA Slewing Ring Bearings | J:148.5 mm; Limiting speed:4300 r/min; Recommended diameter for attachment bolts, inch G:0.5625 in; DN:6.5 mm; Hexagonal key size for grub screw N:3.969 mm; B:49.2 mm; Db2:111 mm; A5:26.5 mm; s1:30.2 mm; A:39 mm; Da:98.4 mm; J7:18 mm; A1:14 mm; Db1:102 mm; Rα:45 °; Fatigue load limit Pu:0.915 kN; Thread grub screw G2:5/16-24 UNF; d:41.275 mm; N:16 mm; L:111 mm; |
| A6-14P3D Rotek Slewing Ring Bearings | r:15; ra:12; e:0.35; Prod_Type3:SRB_CTB_TB; LangID:1; Y1:1.9; da min:864; D_a max:1356; DA_:155; hidTable:ecat_NSSPHR; DE_:1264.42; B_:488; X0:1; hidYobi:232/800CAMKE4; bomp:232/800CAMKE4; Oil rpm:170; X2:0.67; Y0:1.9; DI_:962.672; SBRG:32; |
| RKS.161.16.1424 SKF Slewing Ring Bearings | Limiting speed:5000 r/min; Attachment bolt diameter G:15.875 mm; A:63.5 mm; J min.:174.625 mm; L:225.425 mm; H2:33.337 mm; H:114.3 mm; J max.:180.975 mm; Basic dynamic load rating C:104 kN; s:29.766 mm; Mass bearing unit:4.76 kg; B:59.531 mm; da:49.212 mm; S:0.794 mm; H1:57.15 mm; |
| L6-16P9Z Rotek Slewing Ring Bearings | s1:21 mm; d:25 mm; Mass bearing unit:0.31 kg; A:32 mm; N1:12.5 mm; J min.:100 mm; H1:36.5 mm; Fatigue load limit Pu:0.335 kN; J:105 mm; Thread grub screw G2:M5; H:71 mm; Recommended tightening torque for grub screw:4.2 N·m; B1:33 mm; Basic dynamic load rating C:14 kN; A1:22 mm; J max.:110 mm; Hexagonal key size for grub screw N:2.5 mm; Limiting speed:7000 r/min; Recommended diameter for attachment bolts, inch G:0.375 in; |
| No. | Brand | G | s | J | r | A | L | e | a |
| RKS. 212140106001 | SKF | - | - | - | - | - | 558.8 mm | - | - |
| VLI200544-N | INA | - | - | - | - | - | 466.725 mm | - | - |
| RKS.062.20.0944 | SKF | - | - | - | - | - | - | - | - |
| RKS.121395101002 | SKF | Tr 1000x8 | - | - | - | - | - | - | - |
| RKS.062.20.0414 | SKF | - | - | 650 mm | - | - | - | - | - |
| RKS.062.25.1534 | SKF | - | - | - | 1.1 | - | - | - | - |
| RKS.061.20.1094 | SKF | - | 32.941 mm | - | - | 88.9 mm | 266.7 mm | - | - |
| VLU201094 | INA | M 95x2 | - | - | - | - | - | - | - |
| RKS.210841 | SKF | - | - | - | - | - | 158.75 mm | - | - |
| XSU140414 | INA | - | - | - | - | - | - | - | - |
| RKS.060.20.1094 | SKF | - | - | - | - | - | - | - | - |
| VSI251055-N | INA | - | - | - | - | - | - | - | - |
| M4-22P4Z | Rotek | - | - | - | - | - | - | - | 22.1 mm |
| RKS.427050403001 | SKF | - | - | - | - | - | - | - | - |
| A13-22P4 | Rotek | - | - | - | - | - | - | - | 49.591 mm |
| VSI250755-N | INA | - | - | - | - | - | - | - | - |
| XSU140544 | INA | - | - | - | - | - | - | - | - |
| VU36068 | INA | - | - | - | - | - | - | - | - |
| A10-22E5A | Rotek | - | - | - | - | - | 419.1 mm | - | - |
| A6-9E1B | Rotek | - | - | - | - | - | - | - | - |
| RKS.204040101001 | SKF | - | - | - | 3 | - | - | - | - |
| RKS.211091 | SKF | - | - | - | - | - | - | 0.23 | - |
| RKS.425062621001 | SKF | - | - | - | - | - | - | - | - |
| A6-9P4 | Rotek | - | - | - | - | - | 330.2 mm | - | - |
| VSI201094-N | INA | - | - | - | - | - | - | - | - |
| RKS.161.14.0414 | SKF | - | - | - | - | - | - | - | - |
| RKS.160.14.0644 | SKF | - | - | - | 0.6 | - | - | - | - |
| VA250309-N | INA | - | - | - | - | - | - | - | - |
VSA250955-N INA Slewing Ring Bearings Video
export slewing bearing VSA250955-N - TradeBearings
Product name: four-point contact ball slewing ring Model: VSA250955-N Type: outer gear teeth Boundary dimension: d=855mm D=1096mm H=80mm Weight:
Spherical bearings VSA250955-N - Tejas Thump Cycles
Place of Origin, Original. Brand Name, Original. Certification, C/O,C/Q Follow Your Demand. Model Number, VSA250955-N. Min.Order Quantity, 1 SET
Four point contact bearings - VSA250955-N - 2D drawings
VSA250955-N. Four point contact bearings standard series 25, external gear teeth, lip seals on both sides. 2D drawings and 3D CAD models. Drawings for 2D
VSA250955-N HFH • ABF Store
VSA250955-N HFH available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
VSA250955-N | Lily Bearing
Part Number, VSA250955-N. di. Da. Di. DiZT. d0. da. diZT. H. La. Li. Tooth modulus. Number of fixing holes in outer ring(na). Number of fixing holes in inner
Four point contact bearings - VSA250955-N - medias
Four point contact bearings VSA250955-N. standard series 25, external gear teeth, lip seals on both sides. Four point contact bearings VSA250955-N, standard
Four point contact bearings - VSA250955-N - medias
Four point contact bearings VSA250955-N, standard series 25, external gear teeth,. Radial load Axial load in one direction Axial load in two directions Moments