| VSA200414-N INA Slewing Ring Bearings | Retainer Material:Polymer; Expansion Type:Non-Expansion; Ball Bearing Housing Series:205 Series; Bearing Insert Material:Nickel-Coated Steel; Bearing Inner Ring Material:Steel; Ship Weight:0.73 LB; Ball Material:440 STAINLESS STEEL; Max Bearing Speed:6000 rpm; End Cap Groove:Yes; Housing Material:Polymer; Housing Coating:No Coating; Base to Center Height:Not Applicable; Bearing Bore Shape:Round; Seal Type:Triple Lip; |
| VLI200744-N INA Slewing Ring Bearings | Grease Type:Mobilith SHC PM 220; Max Bearing Speed:4000 rpm; Shaft Attachment (2):Eccentric Collar; d:1.5000 in; Base to Center Height:Not Applicable; Bearing Outer Ring Material:Steel; Ball Grade:Class 10; Flinger Type:Rubberized; Bearing Series:208 Series; Manufacturing Plant Location:Rogersville, TN; End Cap Groove:Yes; Housing Type:2 Bolt Flange; Bearing Family:Eccentric Collar Bal; Ship Weight:4.3 LB; |
| VSA200744-N INA Slewing Ring Bearings | J1:95.25 mm; Eye bolt:2 x 3/8-16 UNC; P90°:138 kN; J min.:431.8 mm; J max.:463.55 mm; Initial grease fill:623.7 g; RG:3/4 NPT; h:50.8 mm; Da:269.999 mm; Ca:82.804 mm; Stabilizing ring:SR-30-0; Cap bolt recommended tightening torque:203.4 N·m; PG:1/4 NPT; P120°:87.2 kN; P60°:230 kN; H1:160.325 mm; Cap bolt, SAE grade:5; A2:215.9 mm; A1:158.75 mm; Mass pillow block:91.6 kg; |
| VA160302-N INA Slewing Ring Bearings | J:94 mm; H1:36 mm; Preload:4890 N; d2:62.1 mm; Required attachment bolt size (DIN 912):M8; da min.:56 mm; r1,2 min.:0.6 mm; ra max.:0.6 mm; D:115 mm; H:46 mm; N:8.8 mm; Static axial stiffnes:1240 N/µm; Da max.:80 mm; Basic dynamic load rating C:80 kN; a:135 mm; Basic static load rating C0:176 kN; Fatigue load limit Pu:6.4 kN; d:40 mm; Attainable speed:3400 r/min; Mass bearing:2.6 kg; |
| VLA200414-N INA Slewing Ring Bearings | Fatigue load limit Pu:63 kN; Mass bearing (including seat washer where applicable):68.5 kg; Limiting speed:600 r/min; Basic dynamic load rating C:572 kN; r1,2 min.:2.1 mm; Da max.:1037 mm; d:1000 mm; Basic static load rating C0:5500 kN; d1 ≈:1086.5 mm; Reference speed:430 r/min; ra max.:2 mm; Minimum load factor A:160; D1 ≈:1003.5 mm; D:1090 mm; da min.:1053 mm; H:70 mm; |
| RKS.162.16.1424 SKF Slewing Ring Bearings | mass:1.77; SBRG:2; DA_:16; dc min:97; dd min:104; D_a max:131; rb:2; ra:2; hidTable:ecat_NSCLDR; db min:89; SDM_:111.3; TSR rpm:5000; hidYobi:NUP216EM; Oil rpm:5300; Prod_Type3:CRB_SR_NUP; yobi:NUP216EM; KBRG:4165; LangID:1; Fw:95.3; C_conv:139000; |
| XU300515 INA Slewing Ring Bearings | N1:14 mm; A5:22 mm; Recommended diameter for attachment bolts, inch G:0.5 in; J7:15.5 mm; d:31.75 mm; Recommended diameter for attachment bolts, mm G:12 mm; A1:27 mm; Limiting speed:1100 r/min; J min.:119 mm; Fatigue load limit Pu:0.655 kN; N4:4 mm; Housing:SY 507 M/VZ033; Hexagonal key size for grub screw N:3 mm; Basic static load rating C0:15.3 kN; H:93 mm; B1:39.5 mm; J6:146 mm; H2:19 mm; A:45 mm; |
| M4-22P4 Rotek Slewing Ring Bearings | Limiting speed:3800 r/min; A1:13.5 mm; N:12.7 mm; Basic dynamic load rating C:16.3 kN; Mass bearing unit:0.96 kg; B4:5 mm; Recommended tightening torque for grub screw:4 N·m; Basic static load rating C0:11.2 kN; Db1:74.1 mm; RG:1/4-28 UNF; Fatigue load limit Pu:0.475 kN; d:30.162 mm; A5:30 mm; Db2:79.4 mm; Thread grub screw G2:1/4-28 UNF; L:79.4 mm; T:42 mm; Recommended diameter for attachment bolts, mm G:10 mm; |
| RKS.921150303001 SKF Slewing Ring Bearings | ra max.:0.6 mm; da max.:72.3 mm; b1:8 mm; b:9 mm; α:6 °; Material constant KM:330; Sealing solution:Triple-lip seals; Da min.:87 mm; Specific dynamic load factor K:150 N/mm²; Basic static load rating C0:1040 kN; B:55.55 mm; D:100.013 mm; dk:91.186 mm; d:63.5 mm; Design (sliding contact surface combination):Steel/steel; Basic dynamic load rating C:520 kN; r2 min.:1 mm; Lubricant:Maintenance free &nd; |
| VSU250755 INA Slewing Ring Bearings | J min.:549.275 mm; Appropriate attachment bolt size G:1.25 in; H:401.637 mm; Cap bolt:4 x 7/8-9 UNC; Initial grease fill:1672.65 g; H1:200.025 mm; P150°:94.3 kN; A1:190.5 mm; Pa:59.6 kN; P60°:290 kN; Bearing limiting speed:2000 r/min; End plug (suffix Y):EPR 23; L:711.2 mm; ba:80.169 mm; Labyrinth ring:2 x LOR 165; P180°:113 kN; da:198.438 mm; Stabilizing ring:2 x 36053-140; Cap bolt recommended tightening torque:271.2 N·m; |
| L6-16P9Z Rotek Slewing Ring Bearings | s1:21 mm; d:25 mm; Mass bearing unit:0.31 kg; A:32 mm; N1:12.5 mm; J min.:100 mm; H1:36.5 mm; Fatigue load limit Pu:0.335 kN; J:105 mm; Thread grub screw G2:M5; H:71 mm; Recommended tightening torque for grub screw:4.2 N·m; B1:33 mm; Basic dynamic load rating C:14 kN; A1:22 mm; J max.:110 mm; Hexagonal key size for grub screw N:2.5 mm; Limiting speed:7000 r/min; Recommended diameter for attachment bolts, inch G:0.375 in; |
| VLA200944-N INA Slewing Ring Bearings | B4:5 mm; Hexagonal key size for grub screw N:3.175 mm; A1:11.4 mm; s1:19.8 mm; Limiting speed with shaft tolerance h6:4300 r/min; N:10.7 mm; Recommended diameter for attachment bolts, mm G:10 mm; L1:63.5 mm; J1:28.6 mm; L:70 mm; Mass bearing unit:0.31 kg; A:34 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Recommended tightening torque for grub screw:4 N·m; Fatigue load limit Pu:0.335 kN; |
| RKS.220941 SKF Slewing Ring Bearings | Ball Material:Steel; Manufacturing Plant Location:Rogersville, TN; Bearing Inner Ring Material:Steel; Flinger Type:Rubberized; Housing Type:Piloted Flange; Housing Coating:No Coating; Retainer Material:Nylon; Max Bearing Speed:4500 rpm; Ring Size:Standard; Base to Center Height:Not Applicable; Retainer Type:Std Retainer; Anti-Rotation Pin:Yes; Shaft Attachment (2):Set Screw; Bearing Duty:Medium Duty; |
| XSU140644 INA Slewing Ring Bearings | RG:3/4 NPT; P90°:207 kN; Eye bolt:2 x 3/8-16 UNC; J1:95.25 mm; P180°:145 kN; Da:289.999 mm; Ca:89.789 mm; Bearing limiting speed:2400 r/min; P60°:345 kN; P120°:133 kN; P150°:120 kN; Pa:42.9 kN; Appropriate attachment bolt size G:1 in; R2:33.337 mm; PG:1/4 NPT; A1:158.75 mm; Cap bolt:7/8-9 UNC; Labyrinth ring:2 x LOR 155; J min.:441.325 mm; H:338.137 mm; |
| RKS.161.14.0414 SKF Slewing Ring Bearings | rs (min):2.1 mm; d:120 mm; with cylindrical bore:1 400 min-1; Dynamic (Cr):4.5 mm; Grease:803 kN; with tapered bore:1 700 min-1; Pu:564 kN; B:76 mm; Oil:83.890 kN; Static (Cor):8.3 mm; D:215 mm; |
| XSA140944-N INA Slewing Ring Bearings | Bearing Inner Ring Material:Steel; Base to Center Height:Standard; Retainer Type:Std Retainer; End Cap Groove:No; UPC:782475654857; Ball Bearing Housing Series:214 Series; Bearing Series:214 Series; Housing Material:Cast Iron; Flinger Material:Steel; Expansion Type:Non-Expansion; Bearing Bore Shape:Round; Bearing Outer Ring Material:Steel; Housing Coating:Powder Coat; Flinger Type:Rubberized; Bearing Family:Setscrew Ball Bearin; |
| No. | Brand | G | s | J | r | A | L | e | a |
| RKS.062.20.1094 | SKF | - | - | - | - | - | - | - | - |
| RKS.121390101002 | SKF | - | - | - | - | - | - | - | - |
| RKS.060.20.0844 | SKF | - | - | - | - | - | - | - | - |
| VSI200644-N | INA | - | - | - | - | - | 679.45 mm | - | - |
| L6-22P9ZD | Rotek | - | - | - | - | - | - | - | - |
| XSI140744-N | INA | - | - | - | - | - | - | - | - |
| A9-24P2 | Rotek | - | - | - | - | - | 628.65 mm | - | - |
| RKS.162.14.0844 | SKF | M 52x3 | - | - | - | - | - | - | - |
| RKS. 413290203001 | SKF | - | - | - | - | - | - | - | 5 mm |
| M5-16P1Z | Rotek | - | - | - | - | - | - | - | - |
| RKS.062.25.1204 | SKF | - | - | - | - | - | - | - | - |
| RKS.220941 | SKF | - | - | - | - | - | - | - | - |
| RKS.062.25.1424 | SKF | - | - | - | - | - | - | - | - |
| VU140325 | INA | - | - | - | - | - | - | - | - |
| RKS.161.14.0844 | SKF | - | - | - | 1 | - | - | - | - |
| RKS.060.25.1314 | SKF | - | - | - | - | - | - | - | - |
| RKS.160.20.1904 | SKF | - | - | - | - | - | - | - | - |
| XSU140414 | INA | - | - | - | - | - | - | - | - |
| VU300574 | INA | - | - | - | - | - | - | - | - |
| VU25038 | INA | - | - | - | - | - | - | - | - |
VSA250755-N INA Slewing Ring Bearings Video
Four point contact bearings - VSA250755-N - medias
Four point contact bearings VSA250755-N, standard series 25, external gear teeth,. Radial load Axial load in one direction Axial load in two directions Moments
VSA250755-N | Lily Bearing
Part Number, VSA250755-N. di. Da. Di. DiZT. d0. da. diZT. H. La. Li. Tooth modulus. Number of fixing holes in outer ring(na). Number of fixing holes in inner
Four point contact bearings - VSA250755-N - medias
Drawings for 2D CAD systems and models for 3D CAD systems are available via the portal "TracePartsOnline.net". Clicking on the link will take you directly to
VSA250755-N four point contact ball slewing bearing external
YOU'LL FIND AN 14000 N Basic Static Radial Load Rating Co EXTENSIVE SELECTION OF VSA250755-N four point contact ball slewing bearing external gear
VSA250755-N INA • ABF Store
VSA250755-N INA available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
VSA250755N External Gear Teeth Slewing Bearing, VSA 25
VSA250755N External Gear Teeth Slewing Bearing 655x898x80- VSA 25 0755 N bearing,Seals Type:Rubber/Fluororubber seals,Material:50Mn,Precision
Four point contact bearings VSA250755-N (Series ... - medias
Four point contact bearings VSA250755-N. (Series VSA25) standard series 25, external gear teeth, lip seals on both sides. The datasheet is only an overview of