| XSI140414-N INA Slewing Ring Bearings | dk:53 mm; Specific dynamic load factor K:150 N/mm²; Basic dynamic load rating C:150 kN; l1 min.:76 mm; Mass rod end:1.9 kg; d:40 mm; l2 max.:194 mm; B:28 mm; d2 max.:94 mm; r1 min.:0.6 mm; G:M 42x3; l7 min.:46 mm; Basic static load rating C0:140 kN; α:6 °; C1 max.:24 mm; Material constant KM:330; h:145 mm; |
| RKS. 512080101001 SKF Slewing Ring Bearings | with tapered bore:710 min-1; Static (Cor):22.3 mm; Pu:2760 kN; Grease:4220 kN; B:165 mm; d:260 mm; with cylindrical bore:600 min-1; rs (min):6 mm; Dynamic (Cr):12 mm; D:540 mm; Oil:339.530 kN; |
| XU16026 INA Slewing Ring Bearings | Grease Type:Mobilgrease XHP222; d:2.4375 in; Bearing Insert Material:Steel; Ship Weight:60 LB; Split Housing:SPLIT; Shaft Attachment Type:SPECIAL DUTY; UPC:782475055371; Bearing Bore Shape:Tapered; Housing Type:4 Bolt Flange; Bearing Series:207 Series; Housing Product Type:SPECIAL DUTY; Expansion Type:Non-Expansion; Housing Series:207 SERIES (207 - 20; Seal Type:Piston Ring; |
| A14-19P4 Rotek Slewing Ring Bearings | B_:7; ALP21:25; SRI:2.06; GRS rpm:32000; a:8.5; C0:2.53; DA_:3.969; Z_:12; SDM_:21.511; C_conv:4550; SRIX:0.03; Oil rpm:43000; m0:0.151; SRE:2.06; SBRG:19; DE_:25.497; C:4.55; r1:0.15; da:17.5; DI_:17.525; |
| RKS.060.20.0644 SKF Slewing Ring Bearings | Minimum load factor A:100; r1,2 min.:3 mm; Limiting speed:750 r/min; Basic dynamic load rating C:650 kN; ra max.:2.5 mm; Basic static load rating C0:4400 kN; H:85 mm; Mass bearing (including seat washer where applicable):58.5 kg; da min.:595 mm; Da max.:575 mm; D:640 mm; Reference speed:530 r/min; D1 ≈:534 mm; Fatigue load limit Pu:68 kN; d:530 mm; d1 ≈:636 mm; |
| XSU141094 INA Slewing Ring Bearings | Bearing Insert Material:Stainless Steel; Housing Coating:No Coating; Bearing Family:Setscrew Ball Bearin; d:50.0000 mm; Retainer Material:Polymer; End Cap Groove:Yes; Flinger Type:INTERNAL RUBBER LIP; UPC:782476478148; Max Bearing Speed:3600 rpm; Bearing Series:210 Series; Grease Type:Mobilgrease FM222; Ship Weight:4.76 LB; Bearing Locking Device:Setscrew; Anti-Rotation Pin:Yes; Ball Bearing Housing Series:210 Series; |
| VSA200844-N INA Slewing Ring Bearings | Bearing Family:Setscrew Ball Bearin; Ball Bearing Housing Series:216 Series; Shaft Attachment (2):Set Screw; Grease Type:Unirex N2; Flinger Material:Steel; Seal Type:Single Lip; Ring Size:Standard; Max Bearing Speed:2500 rpm; UPC:782475814817; Bearing Insert Material:Steel; Housing Type:2 Bolt Pillow Block; Housing Material:Cast Iron; Bearing Series:216 Series; Anti-Rotation Pin:Yes; Ball Grade:Class 10; |
| L6-16N9Z Rotek Slewing Ring Bearings | hidYobi:QJ228; C:315; GRS rpm:2000; r:3; SRE:17.34; SRI:16.51; KBRG:7764; Prod_Type3:ACBB_FP_A; D_:250; SDM_:195; DI_:163.057; yobi:QJ228; mass:9.8; DA_:33.338; ao:136.5; DE_:228.668; Z_:16; SRIX:0.125; LangID:1; B_:42; |
| RKS.162.16.1204 SKF Slewing Ring Bearings | Basic dynamic load rating C:212 kN; J:152.4 mm; N1:20.637 mm; S:0.794 mm; L:193.675 mm; Mass bearing unit:12.2 kg; A6:26.988 mm; da:76.2 mm; Attachment bolt diameter G:4 x 19.05; Limiting speed:2800 r/min; s:31.75 mm; a:6.35 mm; A:69.85 mm; A5:38.1 mm; |
| XSA140544-N INA Slewing Ring Bearings | Basic dynamic load rating C:10500 kN; Fatigue load limit Pu:3100 kN; Reference speed:320 r/min; ra max.:8 mm; D1 ≈:686 mm; d1 ≈:840 mm; da min.:725 mm; r1,2 min.:9.5 mm; B:89 mm; C:116 mm; Mass bearing:650 kg; B1:228 mm; D:920 mm; Da max.:800 mm; H:236 mm; s:308 mm; Minimum axial load factor A:180; Basic static load rating C0:44000 kN; Limiting speed:630 r/min; d:530 mm; |
| RKS.062.20.1094 SKF Slewing Ring Bearings | Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:12.712; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:V Lock; Housing Style:4 Bolt Round Flange Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Expansion; Mounting Bolts:3/4 Inch; Relubricatable:Yes; Insert Part Number:22216; Seals:Triple Lip Urethane; Housing Configuration:1 Piece Solid; |
| RKS.161.14.0414 SKF Slewing Ring Bearings | rs (min):2.1 mm; d:120 mm; with cylindrical bore:1 400 min-1; Dynamic (Cr):4.5 mm; Grease:803 kN; with tapered bore:1 700 min-1; Pu:564 kN; B:76 mm; Oil:83.890 kN; Static (Cor):8.3 mm; D:215 mm; |
| VSU250955 INA Slewing Ring Bearings | Bearing Family:Setscrew Ball Bearin; Anti-Rotation Pin:Yes; Housing Coating:No Coating; Ball Material:440 STAINLESS STEEL; Seal Type:Triple Lip; Bearing Locking Device:Setscrew; Grease Type:Mobilgrease FM222; Bearing Outer Ring Material:Steel; Expansion Type:Non-Expansion; Bearing Insert Material:Nickel-Coated Steel; Self Aligning:Self Centering; Flinger Material:Stainless Steel; Ship Weight:2.2 LB; |
| VI160288-N INA Slewing Ring Bearings | F:415 mm; da min.:391 mm; Basic static load rating C0:3000 kN; r1,2 min.:2.1 mm; B:100 mm; Limiting speed:1000 r/min; Basic dynamic load rating C:968 kN; s max.:2 mm; Mass bearing:42.6 kg; Fatigue load limit Pu:270 kN; D:480 mm; Reference speed:900 r/min; Da max.:469 mm; ra max.:2 mm; d:380 mm; |
| L4-17P8ZD Rotek Slewing Ring Bearings | b:9 mm; da min.:68.3 mm; α:6 °; rb max.:1 mm; B:55.55 mm; Lubricant:Regular relubricatio; d:63.5 mm; r2 min.:1 mm; Sealing solution:Triple-lip seals; Mass plain bearing:1.85 kg; M:6.5 mm; D:100.013 mm; ra max.:0.6 mm; Basic static load rating C0:1040 kN; Da max.:94.7 mm; da max.:72.3 mm; Specific static load factor K0:300 N/mm²; Specific dynamic load factor K:100 N/mm²; dk:91.186 mm; |
| RKS.162.14.0414 SKF Slewing Ring Bearings | Pu:1.710 kN; Grease:5 000 min-1; dynamic Cr:24.530 kN; rs (min):0.6 mm; H:14 mm; Oil:6 700 min-1; d1:40 mm; D1:22 mm; D:40 mm; d:20 mm; static Cor:37.700 kN; |
| No. | Brand | G | s | J | r | A | L | e | a |
| M4-12P4 | Rotek | - | - | - | 0.3 | - | - | - | - |
| L4-13P9Z | Rotek | - | 29.766 mm | - | - | 53.975 mm | 187.325 mm | - | - |
| RKS. 312410102001 | SKF | - | - | - | - | - | - | - | - |
| XU300515 | INA | - | - | - | - | 45 mm | - | - | - |
| RKS.210841 | SKF | - | - | - | - | - | 158.75 mm | - | - |
| A6-9P4 | Rotek | - | - | - | - | - | 330.2 mm | - | - |
| VSA200944-N | INA | - | - | - | - | - | - | - | - |
| RKS.23 0741 | SKF | Tr 480x5 | - | - | - | 6.5 mm | - | - | - |
| VI160288-N | INA | - | - | - | - | - | - | - | - |
| L6-22E9Z | Rotek | - | - | - | 2.1 | - | - | - | - |
| VU300574 | INA | - | - | - | - | - | - | - | - |
| RKS. 211430101001 | SKF | - | - | - | - | - | - | - | - |
| M4-16P4Z | Rotek | - | - | - | - | - | - | - | - |
| RKS. 313500404001 | SKF | - | - | - | - | - | - | - | - |
| RKS.951145101001 | SKF | - | - | - | 0.1 | - | - | - | - |
| XSU140844 | INA | - | - | - | - | - | - | - | 44.167 mm |
| VSI251055-N | INA | - | - | - | - | - | - | - | - |
| RKS.220941 | SKF | - | - | - | - | - | - | - | - |
| RKS.062.25.1644 | SKF | - | - | - | - | - | - | - | - |
| RKS.23 0641 | SKF | - | - | - | - | - | - | - | - |
XSI140544-N INA Slewing Ring Bearings Video
High Precision Crossed roller bearing XSI140544-N, View bearing
High Precision Crossed roller bearing XSI140544-N, US $ 100 - 200 / Set, Cylindrical, Roller, Japan, Japan,Sweden,USA,China(Mainland).Source from
XSI140544-N INA • ABF Store
XSI140544-N INA available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
FAG XSI140544-N轴承_百度百科
FAG XSI140544-N轴承. 编辑 锁定. 中文名: FAG XSI140544-N轴承; 型 号: XSI140544-N. 品 牌: FAG; 系 列: 交叉滚子轴承. 样本图片. 词条标签：. 轴承 ， 科技产品
Crossed roller bearings - XSI140544-N - medias - Schaeffler
Crossed roller bearings XSI140544-N, standard series 14, internal gear teeth, lip. Radial load Axial load in one direction Axial load in two directions Moments
INA XSI140544-N交叉滚子轴承,INA XSI140544-N轴承尺寸
Jul 19, 2018 - Di, 545 mm, 公差: +0,5. d0, 456 mm. da, 541 mm, 定心套长度（见零件图） 公差:-IT7. H, 56 mm. La, 590 mm. Li, 505 mm. m, 6 mm, 模数. na, 32, 外
XSI140544-N | Lily Bearing
Part Number, XSI140544-N. di. Da. Di. d0. da. H. La. Li. Tooth modulus. Number of fixing holes in outer ring(na). Number of fixing holes in inner ring(ni). Number
Crossed roller bearings XSI140544-N (Series XSI14) - medias
Crossed roller bearings XSI140544-N (Series. XSI14) standard series 14, internal gear teeth, lip seals on both sides. The datasheet is only an overview of