| L4-17P8ZD Rotek Slewing Ring Bearings | b:9 mm; da min.:68.3 mm; α:6 °; rb max.:1 mm; B:55.55 mm; Lubricant:Regular relubricatio; d:63.5 mm; r2 min.:1 mm; Sealing solution:Triple-lip seals; Mass plain bearing:1.85 kg; M:6.5 mm; D:100.013 mm; ra max.:0.6 mm; Basic static load rating C0:1040 kN; Da max.:94.7 mm; da max.:72.3 mm; Specific static load factor K0:300 N/mm²; Specific dynamic load factor K:100 N/mm²; dk:91.186 mm; |
| RKS.060.25.1424 SKF Slewing Ring Bearings | B:24 mm; Calculation factor kr:0.15; Basic static load rating C0:104 kN; Da max.:133 mm; Limiting speed:8500 r/min; Reference speed:5600 r/min; d:90 mm; db min.:111 mm; Axial load factor Y:0.6; d1 ≈:108 mm; Limiting value e:0.2; r3,4 min.:1.1 mm; Fatigue load limit Pu:12.7 kN; Basic dynamic load rating C:80.9 kN; D1 ≈:122.1 mm; s max.:3.5 mm; D:140 mm; da min.:96 mm; r1,2 min.:1.5 mm; Mass bearing:1.39 kg; |
| VSU250955 INA Slewing Ring Bearings | Bearing Family:Setscrew Ball Bearin; Anti-Rotation Pin:Yes; Housing Coating:No Coating; Ball Material:440 STAINLESS STEEL; Seal Type:Triple Lip; Bearing Locking Device:Setscrew; Grease Type:Mobilgrease FM222; Bearing Outer Ring Material:Steel; Expansion Type:Non-Expansion; Bearing Insert Material:Nickel-Coated Steel; Self Aligning:Self Centering; Flinger Material:Stainless Steel; Ship Weight:2.2 LB; |
| VLU200944 INA Slewing Ring Bearings | C:117; GRS rpm:4500; C_conv:117000; mass:2.3; ALPHA_:15; DI_:128.19; Prod_Type3:ACBB_SR_MM_DF; 2B_:44; ALP21:15; DE_:156.81; r1:0.6; SRI:7.43; LangID:1; fo:16.5; C0:162; SBRG:19; B_:22; KBRG:7214; ra:1; m0:0.572; |
| VSI250955-N INA Slewing Ring Bearings | Fatigue load limit Pu:475 kN; d:857.25 mm; r1,2 min.:19 mm; Da min.:1003 mm; Reference speed:300 r/min; Db min.:1047 mm; a:228 mm; Calculation factor Y:1.05; d1 ≈:968.261 mm; Mass bearing:245 kg; rb max.:6 mm; B:111.125 mm; Calculation factor e:0.57; Ca min.:17 mm; C:76.2 mm; da max.:912 mm; Cb min.:44 mm; Calculation factor Y0:0.6; Dimension series:EE 157300; Basic static load rating C0:7350 kN; |
| XSA141094-N INA Slewing Ring Bearings | Minimum load factor A:0.79; H:48.1 mm; s:37 mm; D:135 mm; Basic dynamic load rating C:163 kN; H1:52 mm; r1,2 min.:1.5 mm; C:15 mm; Basic static load rating C0:390 kN; d:75 mm; d1 ≈:135 mm; Limiting speed:2400 r/min; ra max.:1 mm; R:100 mm; Mass bearing (including seat washer where applicable):3.2 kg; Fatigue load limit Pu:14 kN; Da max.:105 mm; D1 ≈:77 mm; D3:140 mm; da min.:111 mm; |
| VSU200944 INA Slewing Ring Bearings | Dynamic (Cr):12 mm; Static (Cor):22.3 mm; with cylindrical bore:240 min-1; d:630 mm; B:212 mm; Grease:13360 kN; rs (min):7.5 mm; with tapered bore:300 min-1; Oil:847.050 kN; D:920 mm; Pu:6270 kN; |
| A8-17P1DU Rotek Slewing Ring Bearings | Bearing Inner Ring Material:Steel; Housing Material:Stainless Steel; d:1.5000 in; Ball Material:440 STAINLESS STEEL; Flinger Type:INTERNAL RUBBER LIP; Ball Grade:Class 24; Manufacturing Plant Location:Rogersville, TN; Ball Bearing Housing Series:208 Series; Retainer Material:Polymer; Retainer Type:Max Life Cage; Seal Type:Triple Lip; Ship Weight:4.6 LB; Bearing Family:Grip Tight Ball Bear; End Cap Groove:Yes; |
| VSI200744-N INA Slewing Ring Bearings | A:43 mm; N:17 mm; Hexagonal key size for grub screw N:4.763 mm; B:51.6 mm; J:157 mm; Recommended tightening torque for grub screw:16.5 N·m; A5:42.3 mm; A1:21 mm; B4:9 mm; Basic static load rating C0:23.2 kN; d:49.213 mm; H:197 mm; Thread grub screw G2:3/8-24 UNF; s1:32.6 mm; Fatigue load limit Pu:0.98 kN; Limiting speed:2200 r/min; Mass bearing unit:1.15 kg; T:57.6 mm; Housing material:Composite for food a; |
| A12-22E2 Rotek Slewing Ring Bearings | ba:83.344 mm; Pa:58.7 kN; Cap bolt, SAE grade:8; R1:122.237 mm; L:749.3 mm; P60°:557 kN; Labyrinth ring:2 x LOR 158; Cap bolt:1 1/4-7 UNC; S:4.763 mm; P120°:207 kN; P150°:185 kN; h:62.706 mm; RG:1 NPT; R2:42.862 mm; Ca:107.798 mm; Stabilizing ring:SR-40-34; A1:203.2 mm; P180°:222 kN; Mass pillow block:267 kg; H1:209.55 mm; |
| RKS.221310101001 SKF Slewing Ring Bearings | Fatigue load limit Pu:17 kN; Fw:70 mm; Limiting speed:6700 r/min; U:30 mm; Reference speed:6000 r/min; Basic static load rating C0:137 kN; Mass needle roller and cage assembly:0.15 kg; Ew:78 mm; Basic dynamic load rating C:57.2 kN; |
| VLA200644-N INA Slewing Ring Bearings | B:52 mm; d1:400 mm; G3:9 mm; d3:490 mm; A:4 mm; B5:66 mm; G2:M 6; Mass adapter sleeve assembly:37.6 kg; Hydraulic nut:HMV 84E; B1:168 mm; d:420 mm; G:Tr 420x5; |
| XSI140744-N INA Slewing Ring Bearings | DE_:11.5; SRE:0.67; hidTable:ecat_NSESBI; D_a:11.5; ra:0.15; Z_:12; DA_:1.2; da:9.2; D_:12.7; C:0.54; KBRG:6102; SREX:0.02; LangID:1; Prod_Type3:ESM_ID_OT; mass:1.56; d:7.938; fo:15.9; SRI:0.67; SRIX:0.02; Oil rpm:48000; |
| XSU140844 INA Slewing Ring Bearings | db min.:43.5 mm; K:1.5 mm; r5 min.:0.6 mm; rc max.:0.6 mm; Basic static load rating C0:212 kN; a:44.167 mm; Fatigue load limit Pu:23.6 kN; b:4 mm; l:8 mm; Calculation factor Y2:2.9; d1 ≈:53.45 mm; Reference speed:6300 r/min; r1,2 min.:1.5 mm; Limiting speed:9500 r/min; D:72 mm; Calculation factor e:0.35; Calculation factor Y1:1.9; Mass bearing pair:1.13 kg; ra max.:1.5 mm; T:64 mm; |
| VU36068 INA Slewing Ring Bearings | Calculation factor f2D:1.08; Preload class C GC:680 N; Calculation factor fHC:1; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (single, tandem) Y2:0.87; Reference grease quantity Gref:3.3 cm³; Basic static load rating C0:21.6 kN; Mass bearing:0.23 kg; B:16 mm; Calculation factor f2B:1.02; Static axial stiffness, preload class C:229 N/µm; ra max.:1 mm; Fatigue load limit Pu:0.9 kN; |
| RKS.062.20.0644 SKF Slewing Ring Bearings | Bearing Series:210 Series; Retainer Material:Polymer; Housing Type:Wide Slot Take-Up; Housing Material:Cast Iron; Housing Coating:No Coating; Flinger Material:Steel; Ball Material:Steel; Manufacturing Plant Location:Rogersville, TN; Ship Weight:5.4 LB; UPC:782476483517; Bearing Insert Material:Steel; Ball Bearing Housing Series:210 Series; Bearing Bore Shape:Round; Anti-Rotation Pin:Yes; Seal Type:Triple Lip; |
| No. | Brand | G | s | J | r | A | L | e | a |
| XSU080258 | INA | - | - | - | - | - | - | - | - |
| A6-9P4 | Rotek | - | - | - | - | - | 330.2 mm | - | - |
| RKS.322300101001 | SKF | - | - | - | - | - | - | - | - |
| VSA200544-N | INA | - | - | - | - | - | - | - | - |
| RKS.062.25.1644 | SKF | - | - | - | - | - | - | - | - |
| VLU200544 | INA | - | - | 53 mm | - | - | - | - | 73 mm |
| VLI200844-N | INA | - | - | - | - | - | - | - | - |
| RKS.122295101002 | SKF | - | - | - | - | - | - | - | - |
| RKS.162.14.0544 | SKF | - | - | - | - | - | - | - | - |
| VSU250855 | INA | - | - | - | - | - | - | - | - |
| RKS. 212600101001 | SKF | - | - | - | - | - | - | - | - |
| L6-16E9ZD | Rotek | - | - | - | - | - | - | - | 131.414 mm |
| RKS.061.25.1204 | SKF | - | - | - | - | - | - | - | - |
| RKS. 313500404001 | SKF | - | - | - | - | - | - | - | - |
| VLU200744 | INA | - | - | - | - | - | - | - | - |
| VSA200944-N | INA | - | - | - | - | - | - | - | - |
| VLI200944-N | INA | - | - | - | - | 30 mm | 86 mm | - | - |
| RKS.060.25.1754 | SKF | - | - | - | - | - | - | - | - |
| XSI140944-N | INA | - | - | - | - | - | - | - | - |
| VLI200744-N | INA | - | - | - | - | - | - | - | - |
| VSA200644-N | INA | - | - | - | - | - | - | - | - |
| VLA200744-N | INA | - | - | - | - | - | 279.4 mm | - | - |
| VSI200944-N | INA | - | - | - | - | - | - | - | - |
| A8-22P11 | Rotek | - | - | - | - | - | - | - | - |
| XSU140544 | INA | - | - | - | - | - | - | - | - |
| A14-18E1L | Rotek | - | - | - | - | - | - | - | - |
XSU080398 INA Slewing Ring Bearings Video
XSU080398 Crossed Roller Bearings (360x435x25.4mm
XSU080398 Crossed Roller Bearings (360x435x25.4mm) Robot Arm Bearing 360x435x25.4-BYC XSU080398 bearing,Seals Type:open,Material:Gcr15 bearing
XSU080398 slewing bearing 360x435x25.4mm - TradeBearings
XSU080398 Slewing Bearing 360x435x25.4mm 360x435x25.4-GBZHB or OEM XSU080398 bearing,Seals Type:ZZ,2RS,Open,Material:Bearing steel / Chrome
Crossed roller bearings - XSU080398 - 2D drawings and 3D
XSU080398. Crossed roller bearings standard series 08, without gear teeth, lamellar seals on both sides. 2D drawings and 3D CAD models. Drawings for 2D
XSU080398 crossed roller bearing radial run-out test of outer
BRS crossed roller bearing rotation accuracy test Model: XSU080398 Standard: -0.01mm ~0. Test instrument
XSU080398 Crossed roller bearing|BYC CNC Turntable
XSU080398 crossed roller bearing:Since the mounting holes are provided,it does not require a presser flange or housing. In addition, because it has an
Crossed roller bearings - XSU080398 - medias
XSU080398. Crossed roller bearings standard series 08, without gear teeth, lamellar seals on both sides
XSU080398 | Lily Bearing
XSU080398 INA Part No. XSU080398 Bearing. Specifications. Part Number, XSU080398. di. Da. Di. da. H. La. Li. Number of fixing holes in outer ring(na)