| A8-17N4D Rotek Slewing Ring Bearings | Frame Size:400; Screw Diameter:1.0000 in; Angle Size:1-3/4 X 1-3/4 X 3/16; Ship Weight:20.78 LB; Screw Treatment:ZINC PLATED; Material Type:CARBON STEEL; Take-Up Frame Style:WIDE SLOT; Take-Up Frame Travel:18.0000 in; Special Coating:STANDARD PAINT; UPC:782475583713; |
| VLI200544-N INA Slewing Ring Bearings | L:466.725 mm; S:4.763 mm; Ca:73.787 mm; PG:1/4 NPT; R1:79.375 mm; H1:152.4 mm; ba:57.944 mm; P90°:113 kN; RG:1/2 NPT; Stabilizing ring:SR-26-0; J min.:371.475 mm; Appropriate attachment bolt size G:0.875 in; Mass pillow block:64.5 kg; H:295.275 mm; Pa:24.9 kN; Labyrinth ring:2 x LOR 118; J max.:406.4 mm; P180°:84.5 kN; End plug (suffix Y):EPR 15; Housing:SAF 526; |
| RKS.060.20.0644 SKF Slewing Ring Bearings | Minimum load factor A:100; r1,2 min.:3 mm; Limiting speed:750 r/min; Basic dynamic load rating C:650 kN; ra max.:2.5 mm; Basic static load rating C0:4400 kN; H:85 mm; Mass bearing (including seat washer where applicable):58.5 kg; da min.:595 mm; Da max.:575 mm; D:640 mm; Reference speed:530 r/min; D1 ≈:534 mm; Fatigue load limit Pu:68 kN; d:530 mm; d1 ≈:636 mm; |
| RKS. 211430101001 SKF Slewing Ring Bearings | Ba min.:9 mm; K:7.5 mm; ra max.:2.5 mm; B4:30.5 mm; D:320 mm; B1:141 mm; D1 ≈:275 mm; Basic dynamic load rating C:1456 kN; da max.:220 mm; d1:170 mm; Basic static load rating C0:2080 kN; Calculation factor e:0.31; Calculation factor Y2:3.3; Da max.:306 mm; d2 ≈:220 mm; r1,2 min.:3 mm; Reference speed:1500 r/min; Mass bearing + sleeve:44.5 kg; Fatigue load limit Pu:183 kN; b:13.9 mm; |
| RKS.161.14.0544 SKF Slewing Ring Bearings | L:330.2 mm; Cap bolt:2 x 5/8-11 UNC; A1:88.9 mm; h:34.925 mm; End plug (suffix Y):EPR 9; H2:38.1 mm; A2:127 mm; Ca:45.796 mm; ba:35.719 mm; Cap bolt, SAE grade:8; S:4.763 mm; P150°:26.7 kN; P60°:78.7 kN; P120°:28.9 kN; R1:53.975 mm; Max. speed for PosiTrac Plus seal:1950 r/min; Mass pillow block:24.9 kg; Initial grease fill:110.56 g; Pa:9.25 kN; Housing:SSAFS 517; |
| VLA200944-N INA Slewing Ring Bearings | B4:5 mm; Hexagonal key size for grub screw N:3.175 mm; A1:11.4 mm; s1:19.8 mm; Limiting speed with shaft tolerance h6:4300 r/min; N:10.7 mm; Recommended diameter for attachment bolts, mm G:10 mm; L1:63.5 mm; J1:28.6 mm; L:70 mm; Mass bearing unit:0.31 kg; A:34 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Recommended tightening torque for grub screw:4 N·m; Fatigue load limit Pu:0.335 kN; |
| RKS.162.14.0644 SKF Slewing Ring Bearings | r, r1,2 min.:1.1 mm; Mass inner ring:0.66 kg; d:95 mm; F:110 mm; B:35 mm; |
| VSA250755-N INA Slewing Ring Bearings | C1 max.:24 mm; Specific dynamic load factor K:100 N/mm²; r1 min.:0.6 mm; Material constant KM:330; G:M 42x3; dk:53 mm; l2 max.:194 mm; B:28 mm; α:7 °; d:40 mm; l7 min.:46 mm; d2 max.:94 mm; Basic dynamic load rating C:100 kN; Basic static load rating C0:140 kN; h:145 mm; l1 min.:76 mm; Mass rod end:2.11 kg; |
| RKS.060.20.1094 SKF Slewing Ring Bearings | d:50 mm; B:70 mm; Mass bushing:0.38 kg; Coefficient of friction µ min.:0.05; Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; Tolerance shaft:h8; D:60 mm; Permissible sliding velocity v max.:5 m/s; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Permissible sliding velocity v min.:0.25 m/s; |
| VSA251055-N INA Slewing Ring Bearings | b:13.9 mm; K:7.5 mm; Da max.:505 mm; d3:450 mm; ra max.:3 mm; Calculation factor Y2:5.9; B:106 mm; r1,2 min.:4 mm; B1:164 mm; Calculation factor Y1:4; Limiting speed:1200 r/min; B5:62 mm; Calculation factor Y0:4; D:520 mm; d2 ≈:419 mm; Reference speed:1100 r/min; Basic static load rating C0:3800 kN; Fatigue load limit Pu:285 kN; db min.:393 mm; Basic dynamic load rating C:2011 kN; |
| VSI200944-N INA Slewing Ring Bearings | Max Bearing Speed:6000 rpm; Flinger Type:Rubberized; Housing Type:Piloted Flange; Seal Type:Single Lip; Bearing Duty:Normal Duty; Bearing Inner Ring Material:Steel; Retainer Material:Nylon; Ball Bearing Housing Series:212 Series; Bearing Outer Ring Material:Steel; Bearing Series:212 Series; Self Aligning:Yes; Grease Type:Unirex N2; Bearing Insert Material:Steel; Bearing Locking Device:Tapered Adapter Slee; |
| XSA140844-N INA Slewing Ring Bearings | B:90 mm; B5:112 mm; Hydraulic nut:HMV 142E; d3:830 mm; B1:286 mm; G2:G 1/8; Mass adapter sleeve assembly:193 kg; G:Tr 710x7; d:710 mm; A:8 mm; d1:670 mm; G3:13 mm; |
| RKS.161.16.1204 SKF Slewing Ring Bearings | Base to Center Hight Numeric:4.5000 in; Bearing Insert Material:Steel; Housing Series:307 SERIES (303 - 30; Bearing Bore Shape:Tapered; Shaft Attachment Type:SETSCREW; UPC:782475698639; d:3.5000 in; Ship Weight:66 LB; Grease Type:Mobilgrease XHP222; Bearing Series:307 Series; Bearing Locking Device:Setscrew; Setscrew Angle:65; Seal Type:Triple Lip; Housing Product Type:K / DI; Split Housing:SPLIT; |
| RKS.427020101001 SKF Slewing Ring Bearings | Flinger Material:Steel; d:30.0000 mm; UPC:782475653645; Anti-Rotation Pin:Yes; Max Bearing Speed:6500 rpm; End Cap Groove:Yes; Self Aligning:Self Centering; Ball Grade:Class 10; Shaft Attachment (2):Set Screw; Ring Size:Standard; Bearing Bore Shape:Round; Bearing Outer Ring Material:Steel; Bearing Duty:Normal Duty; Base to Center Height:Not Applicable; Manufacturing Plant Location:Rogersville, TN; |
| XSU080258 INA Slewing Ring Bearings | r1,2 min.:7.5 mm; b:22.3 mm; d:460 mm; Calculation factor Y1:2.3; B:240 mm; D1 ≈:704 mm; Calculation factor Y2:3.4; Basic dynamic load rating C:6765 kN; Calculation factor e:0.3; K:12 mm; Limiting speed:128 r/min; Fatigue load limit Pu:680 kN; Calculation factor Y0:2.2; Mass bearing:414 kg; Basic static load rating C0:10800 kN; Da max.:728 mm; d2 ≈:536 mm; D:760 mm; ra max.:6 mm; |
| M4-16P4 Rotek Slewing Ring Bearings | G:Tr 670x6; d3:780 mm; B:80 mm; A:8 mm; G2:G 1/8; Hydraulic nut:HMV 134E; B1:264 mm; B5:102 mm; d1:630 mm; G3:13 mm; d:670 mm; Mass adapter sleeve assembly:170 kg; |
| No. | Brand | G | s | J | r | A | L | e | a |
| RKS.220841 | SKF | - | - | - | - | - | - | - | - |
| RKS.060.20.0944 | SKF | - | - | - | - | - | - | - | - |
| RKS.220941 | SKF | - | - | - | - | - | - | - | - |
| RKS.425062621001 | SKF | - | - | - | - | - | - | - | - |
| VSU250855 | INA | - | - | - | - | - | - | - | - |
| RKS.162.16.1314 | SKF | - | - | - | - | - | - | - | - |
| RKS.162.14.0944 | SKF | - | - | - | - | - | - | - | - |
| RKS.061.25.1534 | SKF | - | - | - | - | - | - | - | - |
| A13-22P4 | Rotek | - | - | - | - | - | - | - | 49.591 mm |
| L4-17P8ZD | Rotek | - | - | - | - | - | - | - | - |
| RKS. 212140106001 | SKF | - | - | - | - | - | 558.8 mm | - | - |
| RKS.160.16.1644 | SKF | - | 29.766 mm | - | - | 63.5 mm | 225.425 mm | - | - |
| XSA140544-N | INA | - | 308 mm | - | - | - | - | - | - |
| RKS.061.20.1094 | SKF | - | 32.941 mm | - | - | 88.9 mm | 266.7 mm | - | - |
| VLI201094-N | INA | - | - | - | - | - | - | - | - |
| VSU250755 | INA | - | - | - | - | - | 711.2 mm | - | - |
| A14-25P1 | Rotek | - | - | - | - | - | - | - | - |
| RKS.161.16.1204 | SKF | - | - | - | - | - | - | - | - |
| VSU200544 | INA | - | - | - | - | - | - | - | - |
| RKS.210841 | SKF | - | - | - | - | - | 158.75 mm | - | - |
| A6-11P5 | Rotek | - | - | - | - | - | - | - | - |
| VSA251055-N | INA | - | - | - | - | - | - | - | - |
| RKS.222500101001 | SKF | - | - | - | - | - | - | - | - |
| RKS. 212600101001 | SKF | - | - | - | - | - | - | - | - |
| RKS.060.25.1424 | SKF | - | - | - | - | - | - | - | - |
| L4-13P9Z | Rotek | - | 29.766 mm | - | - | 53.975 mm | 187.325 mm | - | - |
| A14-19P4 | Rotek | - | - | - | - | - | - | - | 8.5 |
VLI200414-N INA Slewing Ring Bearings Video
VLI200414-N INA • ABF Store
Product properties. Availability 0 pcs; Brand INA; Item Number VLI200414-N INA; Technical details (N) N=Normalized Gear Teeth On Bearing Ring. ZT=Centring
VLI200414-N | Lily Bearing
Part Number, VLI200414-N. di. Da. DaZT. Di. d0. da. daZT. H. La. Li. Tooth modulus(m). Number of fixing holes in outer ring(na). Number of fixing holes in inner
Four point contact bearings - VLI200414-N - medias - Schaeffler
Four point contact bearings VLI200414-N. light series 20, internal gear teeth, lip seals on both sides. Four point contact bearings VLI200414-N, light series 20,
Flange type rotary table bearings INA VLI200414-N
RIGIA-BRS specialized in producing Flange type rotary table bearings INA VLI200414-N Four point contact bearing (INA slewing bearing structure, internal gear
VLI200414-N Four point contact bearing (Internal gear teeth)
BRS specialized in producing VLI200414-N Four point contact bearing (INA slewing bearing structure, internal gear teeth, flanged outer ring), and other
Four point contact bearings - VLI200414-N - medias
VLI200414-N. Four point contact bearings light series 20, internal gear teeth, lip seals on both sides
VLI200414-N-VSP INA • ABF Store
VLI200414-N-VSP INA available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8